Main Menu

Driver Side Shock Tower

Started by 71chally, December 16, 2023, 09:29:26 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

71chally

So I've noticed what appears to be a strip of arc or mig welding.

Wondering if it could be indicative of crash damage and if I should replace it?

My upper cowl was dented so I have reason to believe there may be some crash damage. Although I measured the  inner fender panels and they seem to match normal measurements.

I know I do need to diamond the frame/body measurements.

jimynick

It depends where those strips of weld are. I've wondered for years if Dodge farmed out the welding on the shock towers to the local sheltered workshop. My car had large chunks of welding in random places; some where they need to be and some not. A good tape measure and a tram gauge will be your friend here. Good luck.  :cheers:
In the immortal words of Jimmy Scott- "pace yourself!"

anlauto

The factory shock towers are mig welded in place at the factory
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration