Main Menu

Good Finds At Carlisle ?

Started by Timbbuc2, July 17, 2018, 08:38:36 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Timbbuc2

Anyone find any great deals or special parts that you were needing?
Get in, I'll drive

cuda hunter

"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Cuda_mark

I bought a booster/master cylinder set up for my convertible and a Fram CA332 (seems like there were thousands of them there this year).

I was only able to hit the show on Saturday but it seems like there are less parts there than even 5 years ago. Maybe it's just my imagination.


Bpret

I saw more 70 challenger grills than cars were produced that year. The best deal I saw was a complete rally dash,Even the pad was good(black) radio,speaker,glove box even a vin tag for$1600.prices over all seemed very high to me.good weather but way to hot.

Floyd

Was that the 70 dash with the v-code VIN?  I should have jotted down that entire VIN

CudaHead

I found what I believe is an original Shaker.
The base is medal and the scoop has the correct number (24654) on it and the star.
I also found a complete A/C box, with vacum hoses in tack and the driverside hose panel in good shape, for only $60.


Bpret

I didn't copy vin either it was a challenger dash. I'm a cuda guy but it was hard to pass up.


Rich G.

I found some really hard parts and got great deals also. I think the key is to walk with a few friends because I think I walk past half of the parts i needed and then my friends would ask if I saw that! Nope, walked right by it!

Spikedog08

@ViperMan  found a horn ring for his car  . . Took a little looking but found!  Very cool!   :banana:
Drive it like you stole it . . . And they're CHASING you!

Brads70

I didn't really need a whole lot? After 10 years of going I guess that's to be expected? Previous owner of my car did a bit of a hack job on the trunk floor so I bought a new one from Stephens Performance , found new AMD in the box trunk drop offs for $100 for the pair so I snagged them too. Then bought new outer window seals, door rod lock clip set and window molding clip set from Tom at R/T specialties. My car might be going in for paint this fall? Not sure yet but wanted to be ready parts wise?  Oh and yet another 1/18 diecast. Came home with money left over?

6pack

I located a NOS parking lens for my cuda also an original oil guage for a ralley dash.  The upper radiator hose for a 340 shaker in aftermarket it was not available for a while.  I hope it was correct.  I located the heater hose support also after seeing mine was missing.  That is why I like looking at the cars to see what others have and then research it out.  I also got vendor business cards from all the parts I got  and others and I write comments on them right away.  Otherwise I end up with a lot of cards with no info.


61K T/A

I picked  up a 6 way seat adjuster in really nice shape. I plan on installing it on the passenger side. It can be done fairly easy. Also got a 18 spline 833 with shift rods in nice shape. Date code 1970. I dropped it off at Brewers stand for the rebuild.

Bpret

I saw the six way seat was thinking about it but couldn't pull the trigger. I thought it was a decent buy and it had the floor brackets👍

Chryco Psycho

I bought nothing for me but found a couple of parts for Kathys Cuda for her  :ohyeah:

Dmz73

Quote from: Chryco Psycho on July 18, 2018, 10:35:39 PM
I bought nothing for me but found a couple of parts for Kathys Cuda for her  :ohyeah:
What did you find?



Sent from my iPhone using Tapatalk