Need help identifing a part

[jae357]

New to E bodies and can anyone tell me what the small electronic part is near the back of the carb. 2 terminals but only one connectors is hooked up from the wiring harness. Just curious!

[blown motor]

jae357, welcome to the forum. Please go to new member introductions and tell us about yourself and your car.

[Cuda Cody]

Hello @jae357  and welcome to the forum    If you can post a photo (attach file) we should be able to help you out.

[73_Cuda_4_Me]

It's probably the choke heater terminal block... mine is mounted to the front coil mounting bracket...

It drops 12 volt to 5 volt signal to heat the bimetallic strip on the stock choke coil that mounts in the top of the stock manifold.

I use mine to go to the choke on my Edelbrock carb, but I hooked it to the 12 volt side with a tandem connector.

Welcome to the forum from sunny West Michigan!

[Chryco Psycho]

I agree , likely the choke resistor to slow the choke opening