Radio codes

[1970 cuda Joe]

Does anybody have R11 & R31 on the same 1970 e-body fender tag? Thank you, Joe

[BZaar]

I have R11 on my fender tag but I think R31 only shows up on line 10 of the broadcast sheet

[1970 cuda Joe]

I have R11 on my fender tag but I think R31 only shows up on line 10 of the broadcast sheet

I have a picture of an original tag from July of 70 that has both. Looking for more. What is the build date of yours?.Joe

[BZaar]

Mine was built April 3, 1970

[1970 cuda Joe]

Mine was built April 3, 1970

Cool. Thanks for posting. It might be a later thing. Your car has R31?...Joe

[BZaar]

Joe,
Yes my car has R31 but it does NOT show up on my fender tag - only on line 10 of my broadcast sheet

[1970 cuda Joe]

Nice. Thanks again....Joe

[cuda hunter]

This one right?

I'm very curious if there are more of this option on tags. 

[1970 cuda Joe]

This one right?

I'm very curious if there are more of this option on tags. 

Me too...Joe

[cuda hunter]

Joe,
Yes my car has R31 but it does NOT show up on my fender tag - only on line 10 of my broadcast sheet

Thanks for posting that @BZaar

[6bblgt]

the earliest '70 model year E-body fender tag info I have with "R31" on the fender tag is "scheduled" 7/1/70 (SPD-701)

[6bblgt]

Mine was built April 3, 1970

it was "SCHEDULED" 4/3/70 - post your broadcast sheet & I'll tell you when it was "In Plant / In Process"

https://forum.e-bodies.org/vin-fender-tag-build-sheet-and-date-codes/13/actual-production-date-vs-scheduled-production-date/810/

do you have an original door sticker?

[1970 cuda Joe]

@6bblgt Thank you. I didn't get anything with this car except a title. The previous owner said no paperwork was found in the car. No fender tag. Car was painted with a colour change so no door sticker. Everybody here has helped me at one time or another to determine what the car was when it left the factory. I get people at shows asking about the fender tag so I decided to have one made with as much knowledge about the car as I could without doing a complete forgery. The car still has all original sheet metal except the hood & the rear valance so there were many places where I found original colour. Where the tag would've had the VON, I just put 70cuda. I used the decoder to help make up what I knew about the car. This is how the car is today. I bought it this way, mostly....Joe

[ec_co]

I think it's a great looking combo in it's current configuration too.

Everything shipped yesterday, don't hesitate to let me know if there are any issues

[BZaar]

You are correct, my SPD is 4/3/70  You are a better man than me if you can determine the in plant date from the original door tag that only shows 4 / 70 + the VIN
My car is VERY original, I am the 3rd owner and have had it since 1977.  From the broadcast sheet my Sequence # is 1055192 - VON is M03453 - anything you can tell me that I don't already know is much appreciated.
I also happen to know that an identical twin of my car followed it down the assembly line in 1970 (VIN 294245 - Seq.# 1055193 - VON M03454)  This car sold at Mecum Kissimee a couple of years ago. I made sure it got to the owner of VIN 245 before it was sold - I don't know where it went after that.  I know this for certain because I found the broadcast sheet for it in my car (behind passenger seat) in 1993.  From 1993 until 2020 when the restoration of my car began, I was of the mind that I had 2 build sheets for my car (found the one for my car under the back seat)

Mine was built April 3, 1970

it was "SCHEDULED" 4/3/70 - post your broadcast sheet & I'll tell you when it was "In Plant / In Process"

https://forum.e-bodies.org/vin-fender-tag-build-sheet-and-date-codes/13/actual-production-date-vs-scheduled-production-date/810/

do you have an original door sticker?