Main Menu

Ride height

Started by 1970 cuda Joe, April 25, 2024, 04:57:52 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

1970 cuda Joe

#15
My RH torsion bar was way out of adj. After making 6 full turns I was able to achieve 25.25" from wheel lip chrome to the ground on all corners except the left rear. It's at 25.125". This car has all factory sheet metal. I don't think I'm going to get any closer to level. The ball joint to pivot spec is also good by the specs provided. Now have almost 1" between lower snubber & frame rail. Thanks for all the help, Joe 
1970 cuda 440-6, 4 speed, Moulin Rouge, re-creation