Main Menu

Shaker Ring Washers?

Started by 392 Cuda, March 20, 2020, 07:50:07 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

392 Cuda

I've been working on my shaker setup, including an AMD shaker hood with the AMD Shaker Ring.

The ring fits perfectly, but It comes with flat washers in addition to the nuts with captive star washers.

It did not come with a gasket. Do the flat washers go between the ring and the hood?

I appreciate any help you can provide!

anlauto

No, in my opinion, the flat washers would not be used whatsoever. :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Racer57

Check the clearance between the bubble and hood to see if there's plenty of room once the rubber seal makes contact.


RUNCHARGER

Sorry O/T but that 69 Cuda sure looks good.
Sheldon

B5fourspeed

The gasket might make the trim ring sit to high.I know it did on mine.I did not use it.

392 Cuda

Thanks, everyone!

It ended up looking pretty good, I think...

The bubble gasket is depressed slightly more than I would like, but I must have miscalculated the height and it's at the bottom of the adjustments I built into the brackets.

Next step is grills, then making it functional, which will require an airbox among other things.

anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


JS29