71 340 require starter shim?

[culp71]

 does a stock 340 require a spacer for the starter?
its about 1/8 inch thick. if so does I am amusing it goes after the trans dust shield but before starter it self?

[Burdar]

I've never heard of one.  Just the dust shield.  IF there was a need for one, yes, it would go on after the dust shield.  The shield has to sit flush against the trans bell.

[Chryco Psycho]

Not on a Mopar 

[culp71]

k good thanks, must have come with the starter, probably used for different application, as the starter gear to converter teeth seem to engage and ride properly.

[culp71]

I just want to check one more time with everyone as I find more places that list that a 340/727 cuda should have this starter shim...
https://www.classicindustries.com/product/1971/plymouth/cuda/parts/md2366.html

[Shane Kelley]

I just want to check one more time with everyone as I find more places that list that a 340/727 cuda should have this starter shim...
https://www.classicindustries.com/product/1971/plymouth/cuda/parts/md2366.html

That's a dust shield not a shim.

[anlauto]

I just want to check one more time with everyone as I find more places that list that a 340/727 cuda should have this starter shim...
https://www.classicindustries.com/product/1971/plymouth/cuda/parts/md2366.html

That's a big block only dust shield.

[culp71]

10-4