changing non rallye dash to rallye

[moparblood]

maybe this has been disscused at length, but what is involved with switching over to a rallye dash?
can i keep my dash frame?
i know there's a wiring kit for harness.
what else?

[purple1]

Light bar is different.

[moparblood]

thats it? i don't have to do anything to dash frame?

[71vert340]

Same dash frame.

[318Stroker]

Dash frame is the same. As mentioned, you will need the light bar with 4 lights, as well as a different heater control panel.

[purple1]

Trim piece at the bottom is different as well. Not sure what you call it. And you already know the wiring is different. And I might be missing a few other small details. But for the most part it bolts right in.

[anlauto]

If you're going to make the switch, go with Dakota Digital 

[Racer57]

Dash frame is the same. As mentioned, you will need the light bar with 4 lights, as well as a different heater control panel.

Why is different heater control panel needed ?

[73chalngr]

The standard gauge speedometer is a larger diameter and dips down into the heater control panel.

[Jay Bee]

Picture is worth 1000 words.

[Jay Bee]

I didn't buy a "kit" when I converted mine, just modified my standard harness.
1. Spliced into the oil light wire to add a connector for the rallye oil gauge.
    You'll need a rallye oil sending unit too.
2. Ran a wire from the coil to the tach
    Sorry, don't remember where I stole power for the tach.

[moparblood]

kinda seems easy, except for buying gauges.
everything is available.
great!