Side marker question

[nsmall]

I know this upsets some people but I'm deleting my side markers on my 73 Cuda.

I do want to keep the wiring harness hooked up so my question is do I need to somehow safely wrap the side marker light?  I was thinking of just wrapping it in some black electrical tape?

I know that photos highlighting the headlight wire but I can take a better picture if you need one. It's the wire closest to the ground.

Thanks

[Chryco Psycho]

Well you could dd the nicer 70-71 lights
The trunk wires are no big deal just tape them into the harness the front are more weather prone so you could leave them open or tape them up or remove the plug ends & tape the wires into the harness just make sure the wire ends will not short out .

[dave73]

Well you could dd the nicer 70-71 lights
The trunk wires are no big deal just tape them into the harness the front are more weather prone so you could leave them open or tape them up or remove the plug ends & tape the wires into the harness just make sure the wire ends will not short out .

That's what I did. I cut the plug ends off, taped the ends up real good and then taped them into the harness.