Wiper linkage 3 speed

[Meyer]

I have the 2 speed 292 link arm on my cuda. I want to switch to 3 speed.

I have the switch/motor

Wich link arms are correct for that setup other than the "293" how about the 514 ?

[6bblgt]

 

[Jay Bee]

FWIW,  Meyer's wiper motor is a 1973 3 speed 3431665.

[Meyer]

So 3431-514 can be used on all 3 speed and variabel motors?

[Meyer]

The motor is busted so any way i need a new! I just want everything to be correct before i buy any parts.
The car has a shaker wich is the only reason i go this route...no room for a 2 speed

[anlauto]

So 3431-514 can be used on all 3 speed and variabel motors?

That's my understanding. I have a set-up out of a 73 Cuda and I see no reason why it wouldn't work in a 70-71.

[Ns1aar]

The hole in the 3431518 Crank Arm will not fit the drive crank in the 70-71 motor, unless you force or file it. You would have the change the drive crank to a 72 part and use the 3431514 Drive Link. Then all would be well and cheaper.
The 2822289 Crank Arm will fit the 72-74 motors but will be loose on the drive crank in the motor. You also would have to use the 2022293 Drive Link. The bushings are different between the 70-71 and 72-74 drive links. This route would be the more expensive way to go.

There are other combinations that can be made to work. 

Start with what motor you either have or want and it can all be made to function properly..com

ns1aar

[Cuda Cody]

I think I have 2 or 3 complete 3 speed wiper set ups with all the linkage, motor and the switch. I prefer not to ship so if you're close to Brush Prairie, WA set up a time to come take a look (and I'll make you a great deal)

[Meyer]

Im in Denmark :-)

[Meyer]

What motor is possible to use other than the 3134665? Is ther another number that is basic the same ?