Main Menu

340 Heads - Looking for information

Started by 1badfish, January 09, 2022, 06:40:15 AM

Previous topic Next topic

0 Members and 2 Guests are viewing this topic.

Chryco Psycho

Depends what you can find , new is good if there is a supply left , I would contact Roseville Moparts first , new I believe only the newest casting is available new  . Often good used sets are available for a reasonable price be aware you will spend about $4k for a complete W2 set up with intake, valve covers,  rockers & pushrods + the heads of course .
they make carzy power I have seen dyno sheets of a 360 running only a small 2 bbl due to race rules still making 550 HP !

Ohiowoodchuck

Does anybody have part numbers for everything needed. I've noticed that Harland sharp has the rockers and shafts for the heads. I'm curious on valve covers etc. I've saw the intake runs around 900.

RUNCHARGER

360-W2's are evil. My son is going to try a diesel transfer case and transmission now.
Sheldon