Main Menu

340 Six Pack intake

Started by Cuda Cody, January 09, 2017, 03:59:48 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Cuda Cody

Are they still making 340 Six Pack Intakes?  Just got a call from a good friend and he's looking for one.  He said it doesn't matter if it's repop or original he'll pay good money for one.  I asked why not just get one from David at Roseville?  He said that they don't make a 340 Six pack intake any more?  Is this correct?  They really not making a 340 Six Pack?  :huh:

Does anyone have one they want to sell?

Roadman




Cuda Cody

DANG, that's a lot of dough  :bigmoney:  and it still needs to be restored!  What were just the intakes going for when they were re-popping them?

Roadman

Quote from: Cuda Cody on January 09, 2017, 04:20:58 PM
DANG, that's a lot of dough  :bigmoney:  and it still needs to be restored!  What were just the intakes going for when they were re-popping them?

                 I looked everywhere, nobody I can find repoping them.  Don't know what they sold for when repoped.

Marc70challenger

http://www.moparonlineperformance.com/product-p/p5153526.htm

These guys do crate 340 six pack crate with intake. Where do they get em from?

Ps. Quite bit  :bigmoney: for motor. But maybe not considering. Doesn't say if its new or old block. Just 4 bolt main

cudaragtop

Just because they list them but no guarantee they have them in stock or can get them...
But...
I have purchased from Monicatti Chrysler before. The others poped up when I searched PN 4529054
https://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idproduct=724

http://www.factorychryslerparts.com/products/Intake-Manifold--Aluminum--Dual-Plane--Six-Pack--Rectangle-Port-1967%C3%BB91-Small-Block/10743869/P4529054.html

http://www.moparamerica.com/oe-mopar/p4529054

I should try to get one just to have if they are not making them any more... I swear they had them at Roseville lat year when I looked but not there now.

- Randy D. 1970 'Cuda 340 4-Speed Convertible
69 Barracuda G3 Hemi/8HP70 Resto-Mod Project Album: https://goo.gl/photos/XjsAsx4LDo7psimU8


Cuda Cody

@MoparDave  needs to fill us in and what's happening with these 340 Six Pack intakes   :notsure:

MoparDave

this intake hasn't been available in over 16 months. like most items FCA doesn't see the performance line as a profit center. Never have.  P parts are secondary to Accessories and they have no budget to do much at all. My  :alan2cents: worth is the exclusive contract is coming to an end with edlebrock and mopar does not want to fulfill orders or extend any contract with slow moving products. Once the contract expires then edlebrock can sell at will.

As for some of these "online" sellers they have no clue as they are or most are not even FCA dealers that can give you a straight answer on any part they list. We are only a handful of dealers selling P Parts and probably the only dealer that do what we do in the restoration theatre.

there are NO crate motors available and most likely there will not be any available, Unless of course you want the 345 or 392.
Please Email me at daver@manciniracing.com or call 586-790-4100

A.Gramz


anlauto

I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration


71GranCoupe

That news about the 6-pack intakes is just sucky. Not to long ago, about a year, seen several on sleezbay for like $350-$400. Wasn't concerned, guess it is now.   :headbang:

HP_Cuda


That just a repop Aluminum one the guys wants to off because he is not going to use it.

I wonder what the price of an original Cast/Aluminum setup would be.

:popcorn:
1970 Cuda Yellow 440 4 speed (Sold)
1970 Cuda clone 440 4 speed FJ5
1975 Dodge Power Wagon W200

MoparDave

I just checked this again and MOPAR has discontinued this piece at the end of December 2016 was the ruling.  Only six pack intakes that are available now are B-RB-Hemi. no more small block. I would suspect now that its dropped. Edlebrock will release there version soon.
Please Email me at daver@manciniracing.com or call 586-790-4100

cataclysm80

I bought a repop about 13 years ago.
It has Edelbrock cast into it.

I could use another.