Main Menu

833 four speed issue

Started by B5fourspeed, May 11, 2022, 03:03:35 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

B5fourspeed

The tranny is rebuilt.The clutch is new and new flywheel.I'm having trouble getting 2nd gear a lot.Sometimes it goes right in nice and other times the shifter cannot find it.When I adjusted the rods I used a drill bit to line of the rods.Could the 1st and 2nd gear rod be off by 1 or 2 turns on the adjustment.Any thoughts.Thanks

Bullitt-

Sounds like it could be the same problem this guy had... Solution was in the shift lever
http://www.cuda-challenger.com/cc/index.php?topic=68273.0
.                                               [glow=black,42,300]Doin It Southern Syle[/glow]       

B5fourspeed