A little water pump leak ...

[THE ZUKE]

The hole points down.

Thanks @RUNCHARGER 

[THE ZUKE]

the casting differences around the mounting holes affect nothing ,  the squared casting goes to the top on both

Thanks @Chryco Psycho 

Ok  so exactly in the same direction as my pictures.

[THE ZUKE]

Hello friends, 

If you have problems with the old seal of the water pump (for example).

I used this product: LOCTITE 7200, it's just magic  .

10 minutes of installation and everything comes off alone  but be careful to protect the painted parts.

Then put the new water pump EDELBROCK but ... I have not yet received the panhead screws  that replace those who rubbed on the back of the pulley

[Chryco Psycho]

Looks good !

[Chryco Psycho]

Did you get or make thinner bolts so the bolt heads do not contact the pulley ?

[THE ZUKE]

Looks good !

[THE ZUKE]

Did you get or make thinner bolts so the bolt heads do not contact the pulley ?

I ordered special screws 3/8-16 UNC 7/8"  , they will come from Germany.

They will be the same dimensions as those installed but with a different head

[jimynick]

Perfect! 

[Chryco Psycho]

That should work great !

[THE ZUKE]

That should work great !

Yes I'm sure of it. 

[THE ZUKE]

It's good, the screws delivered. 

Last night I went all up with teflon tape and sealing for nets. 

Everything goes great, no more need washers for the pulley does not rub.

Friday it will be the filling of the cooling system  and test ....

[Strawdawg]

Might regret using red loctite if you ever have to pull it apart

[RUNCHARGER]

Sealant, he'll be okay.

[Strawdawg]

Sorry! I looked at the color!

[Brads70]

Looks great! Hopefully no more troubles for awhile!