Main Menu

A little water pump leak ...

Started by THE ZUKE, December 30, 2018, 01:10:13 PM

Previous topic Next topic

0 Members and 6 Guests are viewing this topic.


THE ZUKE

Quote from: Chryco Psycho on March 09, 2019, 09:36:24 PM
the casting differences around the mounting holes affect nothing ,  the squared casting goes to the top on both

Thanks @Chryco Psycho  ;)

Ok  :bigthumb: so exactly in the same direction as my pictures.

THE ZUKE

Hello friends,  ;)

If you have problems with the old seal of the water pump (for example).

I used this product: LOCTITE 7200, it's just magic  :perfect10:.

10 minutes of installation and everything comes off alone  :bravo: but be careful to protect the painted parts.

Then put the new water pump EDELBROCK but ... I have not yet received the panhead screws  :dunno: that replace those who rubbed on the back of the pulley


Chryco Psycho


Chryco Psycho

Did you get or make thinner bolts so the bolt heads do not contact the pulley ?


THE ZUKE

Quote from: Chryco Psycho on March 16, 2019, 09:49:18 PM
Did you get or make thinner bolts so the bolt heads do not contact the pulley ?

I ordered special screws 3/8-16 UNC 7/8"  ;), they will come from Germany.

They will be the same dimensions as those installed but with a different head


jimynick

In the immortal words of Jimmy Scott- "pace yourself!"

Chryco Psycho



THE ZUKE

#40
It's good, the screws delivered.  :bigthumb:

Last night I went all up with teflon tape and sealing for nets.  :tool:

Everything goes great, no more need washers for the pulley does not rub.

Friday it will be the filling of the cooling system  :) and test .... ::)


Strawdawg

Might regret using red loctite if you ever have to pull it apart :)
Steve

RUNCHARGER

Sheldon

Strawdawg

Steve

Brads70

Looks great! Hopefully no more troubles for awhile!  :bradsthumb: