Angle Oil Filter Adapter Bolt

[erik70rt]

Pulled it last night and found why it was leaking.  My buddy who said he could fix it put in the oil filter plate and mounted the angle adapter on top of that.  And he didn't install a gasket between the plate and the block.  I'll fix all that tonight and hopefully it won't leak again. 

[cuda dad]

That will do it every time.

[1 Wild R/T]

Yes, I put the right gaskets in the right locations.

Appears not.....

[Shane Kelley]

That's why I asked. That's the only time I have seen one leak. Improper gasket placement. This is the first time I have heard of that problem happening.

[erik70rt]

Yes, I put the right gaskets in the right locations.

Appears not.....

All the gaskets for the angled oil filter were correct.  Since the filter plate is not to be used when using the angle adapter, I'm not sure why he thought that would help.  Then not put a gasket between that plate and the block is even more of a mystery.  Needless to say, I will correct it.

[1 Wild R/T]

Yes, I put the right gaskets in the right locations.

Appears not.....

All the gaskets for the angled oil filter were correct.  Since the filter plate is not to be used when using the angle adapter, I'm not sure why he thought that would help.  Then not put a gasket between that plate and the block is even more of a mystery.  Needless to say, I will correct it.

I'm sure you will, but currently it's more fun to   

[erik70rt]

Poke away!  I can take it!  LOL

[1 Wild R/T]

   Wait, beer after you fix the leak...