axle seals

[booyaballer]

i have to change a rear end seal.  any tips?  anything else I should consider changing/upgrading while i'm in there?

thanks.

[Cuda Cody]

Put a little grease on the seal lip so it "sets" without over heating.  That will assure a good long lasting seal.

[Chryco Psycho]

Use a proper seal driver to get it into the housing straight

[Rich G.]

Pack the back of the seal where the spring is with grease so it doesn't fly out when you bang the seal in.

[RUNCHARGER]

Do as best you can at repacking the axle bearings.