Best quality small block 90 degree adapter gaskets?

[torredcuda]

Sprung a leak!  I`ve heard mentioned the aftermarket gaskets for the small block 90 degree adapter are thinner and don`t seal as good, anyone have a source for the correct, good quality gaskets for this?

[73_Cuda_4_Me]

I originally got mine through Summit, but it's not available there today... Found this, though.... but apparently it's on backorder!   

https://www.moparonlineperformance.com/product-p/p5249320.htm


Brewer's Performance shows a kit with bolt, and you could call to see if in stock...

http://www.brewersperformance.com/proddetail.php?prod=OFB-1

[torredcuda]

Thanks, I also just found these from Detroit Muscle and they have the copper washer so I`m ordering two to keep one for a spare. I think the old Mopar Performance ones had the copper washer but it looks like they now only have a fiber one - cheapened like everything else. 

https://www.detroitmuscletechnologies.com/mopar-right-angle-filter-adapter-gasket-set-package-p5249320/

[blown motor]

I took my adapter off years ago. Not sure why you need it.

[torredcuda]

I took my adapter off years ago. Not sure why you need it.

Headers - I could probably use a short filter but it still puts it awfully close to the header, not sure if the heat from it would really an issue or not?

[jimynick]

Serendipity! Would you consider selling it to me Murray? I need one for the stroker, otherwise I'll have to pull the one on the current engine. 

[blown motor]

I took my adapter off years ago. Not sure why you need it.

Headers - I could probably use a short filter but it still puts it awfully close to the header, not sure if the heat from it would really an issue or not?

I have TTI headers.

[blown motor]

 @jimynick I sold it last summer Ian. I'll check with Tim in Stratford and see if he has one.

[torredcuda]

I took my adapter off years ago. Not sure why you need it.

Headers - I could probably use a short filter but it still puts it awfully close to the header, not sure if the heat from it would really an issue or not?

I have TTI headers.

I have Hooker Super Comps.