Carburator gasket interchange

[Mrbill426]

Does anyone know if any or all gaskets for an AVS will fit an Edlebrock 4 barrel?  I have a un-installed 9906 that I want to remove the cover to inspect because it has been sitting on a shelf for about 10 years.  No visual outside problems but...

[Mrbill426]

Forgot to mention that I have an AVS kit on the shelf ready to use.

[Chryco Psycho]

Overall I would say no but it depends what Eddy carb you have , the Carter AVS & the Eddy AFB are very different carbs but Eddy now has the avs style carbs also again I am not sure how similar those would be but if you have a 1406 or 1411 I doubt much will fit . Not sure what the 9906 is 

[Mrbill426]

@Chryco Psycho thanks I was not sure; I thought maybe the top cover (bowl?) gasket would at least be the same.  The 9906 is a 1406 that has been rebuilt by Edelbrock.

https://www.edelbrock.com/reman-performer-series-600-cfm-carburetor-with-electric-choke-in-satin-non-egr-9906.html

Overall I would say no but it depends what Eddy carb you have , the Carter AVS & the Eddy AFB are very different carbs but Eddy now has the avs style carbs also again I am not sure how similar those would be but if you have a 1406 or 1411 I doubt much will fit . Not sure what the 9906 is