Main Menu

Cast crank 340, looking for a flywheel...

Started by FSHTAIL, September 01, 2021, 11:56:28 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

FSHTAIL

I went to a few of my local auto parts stores and they don't even have a listing for a flywheel for my 73 Cuda 340.   

I don't race it or need anything extreme, OEM quality would be fine, but I don't know where to go, what's good and what to avoid.

I am about to do a Tremec tkx swap, I figured I would get a fresh flywheel. 

Any recommendations?
Thank you. 
1973 BS23H Cuda' 340/TKX 5 speed (70 AAR clone-ish)

1 Wild R/T

Typically you buy a neutral balanced flywheel & have a machine shop balance it for your application....  If you want to do that I can dig up the info....

If you want the easy way

http://www.brewersperformance.com/proddetail.php?prod=FW598N

If you look at the options you need to select 340 cast crank like in the picture


erik70rt

Quote from: Chris D. on September 01, 2021, 11:56:28 PM
I went to a few of my local auto parts stores and they don't even have a listing for a flywheel for my 73 Cuda 340.   

I don't race it or need anything extreme, OEM quality would be fine, but I don't know where to go, what's good and what to avoid.

I am about to do a Tremec tkx swap, I figured I would get a fresh flywheel. 

Any recommendations?
Thank you.

Summit carries one.  I was looking at it for my cast crank as well.
Contrary to the opinions of some, I am not dumber than I look.


1 Wild R/T

Quote from: erik70rt on September 02, 2021, 06:18:03 AM
Quote from: Chris D. on September 01, 2021, 11:56:28 PM
I went to a few of my local auto parts stores and they don't even have a listing for a flywheel for my 73 Cuda 340.   

I don't race it or need anything extreme, OEM quality would be fine, but I don't know where to go, what's good and what to avoid.

I am about to do a Tremec tkx swap, I figured I would get a fresh flywheel. 

Any recommendations?
Thank you.

Summit carries one.  I was looking at it for my cast crank as well.

Got a link? Cause I just looked & while they list a couple in the $500 range they all show as shipping in 3-4 months...

Think I'd stick with ships this week for $230....

erik70rt

Contrary to the opinions of some, I am not dumber than I look.

FSHTAIL

I went with brewers, got the ARP bolts, good to go.   
Thanks 1 Wild R/T
Easy peasy lemon squeezy
1973 BS23H Cuda' 340/TKX 5 speed (70 AAR clone-ish)