Magnum cam in an LA engine

[GoMangoBoys]

I have a 92 La 360 with roller cam.  Can I use roller cams for the Magnum engines in this engine?

[Chryco Psycho]

I believe so but not 100%

[jimynick]

If it's carbureted, make sure your cam has the fuel pump eccentric on it's nose. Call Lunati, for advice and a good cam selection. I'm running what I think is a '92 roller block and they geared me up very nicely. The engine runs strong and the idle is fab!  

[HP2]

LA blocks don't have the holes to bolt in the roller lifter retainers. Not sure if those can be retrofitted but you will need some means to keep the rollers aligned.

[RUNCHARGER]

He said his block is a 92 LA which used a roller cam from the factory. I am pretty sure the Magnum cam will work in his block but I haven't done it so can't comment with certainty.