Pushrods for Trick Flow Heads

[GoMangoBoys]

I am building a 408 stroker 1992 LA with a roller cam. I have the Trick Flow Heads.  I am using the Harland and Sharp roller rockers.  The pushrods need to be a cup at the top and a ball at the bottom.  It is looking like I will need custom length pushrods.  Does anyone have experience with this?  I am going to get a pushrod length checker to get the exact length,  but at this point it looks like I need about 6.5".  I don't see anything available that is close to that.  The rockers are adjustable, so there is some wiggle room.

[JonH]

Contact Smith brothers pushrods. They will build you whatever you need.

[Brads70]

I've had these guys make them for me.
https://www.pushrods.net/

[Chryco Psycho]

Smith Bros for sure . they ask for spring load , use appropriate tube thickness , any length & cup or ball ends , usually within 48 hrs