Main Menu

Recommended throttle cable

Started by usraptor, May 13, 2017, 02:35:14 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

usraptor

'70 'Cuda, 440, 4-speed, Holley dominator intake, and Quick Fuel 880 CFM carb.  I purchased the pictured Holley 4150 throttle cable bracket to use with the carb/intake however the stock throttle cable, while the correct length (22.5"), won't work with this cable bracket.  I've been looking for Lokar cables that will work but can't find any that are the right length, (closest is 24") and I also need one that will attach to the stock gas pedal.  I'm sure others have done something similar to this already, so can somebody please direct me toward the correct Lokar (or other brand) cable that will work with this set up.  Thanks in advance.
Brad

Chryco Psycho

I have often jut added a lnk from the end of the cable to the bracket on the carb to extend it rather than replace the cable

usraptor

Thanks Chryco.    My problem is that with the Holley bracket I have no way of tightening down the OEM cable without going Rube Goldberg on it.


Brads70

Here is what I used/did Lokar cables....

usraptor

Thanks Brads70.  Do you know which cable (length/part no.) you used?

Brads70

Quote from: usraptor on May 14, 2017, 06:27:43 AM
Thanks Brads70.  Do you know which cable (length/part no.) you used?

I don't remember the part numbers I used but the lokar stuff is universal, you cut it to the length you require.

usraptor

Quote from: Brads70 on May 14, 2017, 09:54:21 AM
Quote from: usraptor on May 14, 2017, 06:27:43 AM
Thanks Brads70.  Do you know which cable (length/part no.) you used?

I don't remember the part numbers I used but the lokar stuff is universal, you cut it to the length you require.

THANKS   :twothumbsup:


303 Mopar

Quote from: usraptor on May 14, 2017, 01:17:01 PM
Quote from: Brads70 on May 14, 2017, 09:54:21 AM
Quote from: usraptor on May 14, 2017, 06:27:43 AM
Thanks Brads70.  Do you know which cable (length/part no.) you used?

I don't remember the part numbers I used but the lokar stuff is universal, you cut it to the length you require.

THANKS   :twothumbsup:

:iagree:  It is universal. 

You need the cable - https://www.summitracing.com/parts/lok-tc-1000u
And bracket - https://www.summitracing.com/parts/lok-srk-4000

usraptor