Main Menu

Trans Mount type

Started by Aloha Randy, January 13, 2022, 11:37:32 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Aloha Randy

I have a 1970 dodge Challenger RT 383 / 727 auto. I found that the rubber in my transmission mount was not looking good so I went to order one. When you look at mounts on Classic, Summit, Rock Auto etc. there are a large selection of mounts that a look very different than the one I have pictured. Summit sent me one that has a threaded bolt mounted and pointing to the ground. Mine has a thru bolt set up like in the service manual page 21-60 Fig 94. What is up with all the referencing a different mount when ordering? Just  wondering....got to be a different trans crossmember that the other works on.

anlauto

Sounds like Summit sent you a B Body mount...Try Roseville Moparts or RockAuto  :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Chryco Psycho

E bodies all use the cross bolt type  , the vertical bolt type is earlier B body .
Roseville is a great place to order the right one or Mancini .
you can do the Poly mount conversion also using the Energy Suspension part .