Any garage equipment guru’s??I’m

[BIGSHCLUNK]

I'm in need of this switch, some guys call this an encoder. It's from a (weong short dong) no name tire machine. Yes , took it apart- 2 terminals totally burnt. Found a few online but not correct. Anybody???

[dodj]

Looks like a D11. Can you get me a pic of the label showing cat #?
Absolutely nothing to do with an encoder. It's merely a switch. Multiple contacts, but still just a switch.

[A.Gramz]

Looks like a 12 pole 3 position cam switch.  But I'm no electrician.  That the forward/off/reverse switch?

Something like this?   
https://m.youtube.com/watch?v=lvs36KB--AA

[gzig5]

Looks like a drum switch for reversing a motor?  Three phase?

Here's a similar one for your pizza machine.   
https://www.northernpizzaequipment.com/vcm-40-drum-switch-new-style.html

Being serious, I'd need to see the wiring diagram if we can't find a replacement via cat#

[BIGSHCLUNK]

Cat # ??? 

[Dakota]

This is for a 380 volt switch which appears to be what you have:

https://www.ebay.com/p/70-105mm-380v-Tire-Changer-Machine-Motor-Forward-Reverse-Switch-Turn-Positioning/13005060123?iid=201999033412&chn=ps


This is for a 110 volt machine.  It doesn't appear to be what you have but the vendor (carliftparts.com) might be helpful.

https://www.amazon.com/RANGER-CHANGER-MACHINE-FORWARD-REVERSE/dp/B01NBX85KS/ref=asc_df_B01NBX85KS/?tag=hyprod-20&linkCode=df0&hvadid=241997376629&hvpos=1o1&hvnetw=g&hvrand=8343565747869257281&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1022896&hvtargid=pla-613180798688&psc=1

[mopar jack]

This one fits Eagle tire changer and most Chinese made brands. https://www.carliftparts.com/product/eagle-tire-changer-ac-motor-forward-reverse-switch-etc-550-etc-960-etc-400/?gclid=Cj0KCQiAnY_jBRDdARIsAIEqpJ34XaZZ7EDr7AVuEL0RJVLzgC3jyraAtBed-T5cq5DU63PBFlIoFIEaAl2JEALw_wcB

[gzig5]

Cat # ???

Catalog number.

Mopar Jack may have nailed it.

[BIGSHCLUNK]

Hey guy's THANKS FOR THE REPLY'S !  I've looked at a few of these online - seems the measurements are kind of where I'm hung up at the moment. There is room for a "larger" case style but, it needs to have to fit the mount plate and the arm that connects to the peddle. Shaft length is also important. 

[BIGSHCLUNK]

Just heard back from Dave @ carlftparts............    (shit emoji here)

[BIGSHCLUNK]

Just heard back from shopequiptmentparts.... same as above