ignition switch for a hotrod

[GoMangoBoys]

I am restoring a 32 Plymouth.  I need a generic ignition switch for it.  I would love to get one that uses the same style Chrysler keys as the mopars from the 70's.  Any suggestions?  I say some nice ignition switches, but they all have had either generic round keys, or Chevy looking keys.

[cuda hunter]

  

[Bullitt-]

 It appears that pre-69 models used the type key your referring to
I see used on ebag https://www.ebay.com/itm/404380264466?_trkparms

 There are three components, each of which can be purchased new.

switch, cylinder & bezel

Here is a kit including door locks
https://www.moparmall.com/Ignition-Switch-Switch-Bezel-Matched-Ign-Door-p/301-053_a.htm

 or bezel  +   switch/cylinder much cheaper
https://www.classicindustries.com/product/*md2685.html
https://www.classicindustries.com/product/1968/plymouth/roadrunner/parts/MB2193.html

[GoMangoBoys]

Thanks.  You put me on the right track.  I ended up buying the 68 version as an NOS on Ebay.  I felt that will have a better quality than a reproduction most likely made in China. I will get the bezel from Classic Industries.
Thanks for your help.