Wheel alignment

[cudamadd]

Ok took the car to the suspension specialist to day  they got the parts from the local shop which deal with MOOG top upper control arms finished no problem But when they got to the lower control arm bushing the parts from MOOG were to big so I checked on their parts page and it  all checked out   Looking back at the box and found that the parts were made in India .i could not believe it . Found out are in Australia other mopar fans have had the same problem So car was not finished. And we find our self chasing down the correct parts  again .Just hope I can find some one who stocks  parts from the U.S A 

[1 Wild R/T]

Lower bushings have been an issue for a few years now... MOOG needs to get their sh*t together... They know about the problem, they need to fix the problem...

[cudamadd]

Oh ok thanks 1 Wild R/T

[Mr Lee]

So are you still looking for LCA bushings? I'm not sure if they're made in the USA, but I think I used PST for mine and had no issues.


Sent from my iPhone using Tapatalk

[mopar jack]

I just went through this problem with moog lower bushings and finally found a good replacement. I went with a Pro Forged bushing from Summit racing. As soon as I took it out of the box I could see the quality of the part and the inner bushing diameter measured correctly. I paid $11.99 each. https://www.summitracing.com/parts/pof-115-10015

[cudamadd]

Mr Lee not sure if the suspension shop as found replacement parts yet ,I will find out today .But at under $15.00 at summit racing just blows my mind how cheap they are over there .I know the shop had price them at $80.00 and that's just the bushers. Cheers