Recent posts

[1970 Dodge Challenger 440 R/T Wagon]

#1

General Topics / Re: HOT RODS,RAT RODS,CUSTOMS,...

Last post by 700 AKN - May 18, 2024, 11:12:56 PM

1970 Dodge Challenger 440 R/T Wagon

#2

Electrical & Audio / Re: Intermittent problem with ...

Last post by 70Challenger440 - May 18, 2024, 10:26:17 PM

Is the vacuum advance on the distributor hooked up?

Yes .. and it is connected to the passenger side port of the carb as it has been the last decade.  Neither side ever caused a backfire. Backfiring just started last week. Since you brought this up which of the 2 ports should I use?

#3

Electrical & Audio / Re: Intermittent problem with ...

Last post by Skdmark - May 18, 2024, 09:12:51 PM

Is the vacuum advance on the distributor hooked up?

#4

Interior / Shipping seats

Last post by 71GranCoupe - May 18, 2024, 07:33:36 PM

I have a set of 70-71 E Body seats and wondering if anyone has tried shipping them. Do they have to be split for shipping or??? Any insight is appreciated. thanks for any suggestions, as I don't want to list them if shipping is difficult or just not practical.

#5

H

Interior / 70 Cuda Front bucket seats sea...

Last post by HemiRod - May 18, 2024, 05:28:59 PM

My 70 Cuda has date code 1969-3 on the original belts in car.  Missing the 2 lap and shoulder buckles. I have seen a couple and their labels say Chrysler Corp 2999585 and code F 3569.  I checked in 70-71 Chrysler parts catalogue and this label number is not there.  The 4752 is the part number. what does F 3569 mean.  I thought it may be 356 day of 69.  However, I saw another with F 5069...only 365 days in a year, so I must be wrong.

Please help if you can.

#6

Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) / Re: Caliper sealing washers

Last post by headejm - May 18, 2024, 04:32:16 PM

I bought this relatively inexpensive Dorman kit. Has not leaked in four or so years.

#7

X

Electrical & Audio / Re: Alternator Bypass Wire Rou...

Last post by Xghobo - May 18, 2024, 04:18:26 PM

It looks like crackedback has not been on the forum since Nov 2023.
Hope he's ok.

I spoke to him about 2 months ago and am pretty sure he is retired. I had to go elsewhere

#8

1

Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) / Re: Caliper sealing washers

Last post by 1970 cuda Joe - May 18, 2024, 04:03:33 PM

I'm thinking the aftermarket is too hard & not allowing it to crush....Thank you, Joe

#9

1

Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) / Re: Is this a partial VIN?

Last post by 1970 cuda Joe - May 18, 2024, 04:00:45 PM

a 1968 non-HP engine will not have a VIN stamping

Thank you. I'm beginning to see that....Joe

#10

Cuda & Challenger General Discussion (ROSEVILLE MOPARTS) / Re: Is this a partial VIN?

Last post by 6bblgt - May 18, 2024, 03:12:13 PM

a 1968 non-HP engine will not have a VIN stamping