Anyone ever install a Holley Sniper with a shaker or any other EFI system? How did the fit, etc.?
https://www.summitracing.com/parts/sne-550-511k
Thanks Dave
Yes, I am running the Holley Sniper Terminator X Stealth kit (Item 550-1003). The computer is external with the Terminator X and I mounted it inside under the dash on the driver's side. I also run the Holley Hyperspark distributor (556-306BK), Hyperspark ignition box (556-151), Hyperspark coil (556-152), and EFI Fuel Pressure Regulator (12-880). The ignition box is mounted inside above the driveshaft tunnel.
Great news thanks for the info. I appreciate it.
I installed a Holley Sniper 'Dual' Quad system will mount up to a stock manifold (and Edelbrock dual quad intake) with no modifications for the 426 Hemi.
The shaker dual carb base plate needs to be the AVS version to fit the 4150 throttle bodies, the factory AFB version the carb holes are too small.
The AVS (Edelbrock/4150 version) will need modification the front area where the front fuel rail cross over tube is, more exactly the 90 degree fittings on the front carb stick too far forward and hit the under side of the base plate. I used a hammer and dolly to push the metal up to clear the Holley fittings.
Once the metal is pushed up a bit to clear the fittings the shaker system fits. The overall height is the same when compared to the stock manifold and carbs :)