I'm replacing the rad in the Charger with a higher capacity one. The question is do I go with standard aluminum like I have now or black anodized?
I would say it depends on what's actually anodized ? If the inside of the tubes are then I might go for it other wise if it's just the tanks I'd just used black BBQ paint. Cheap and easy to touch up if needed.
It's the inside where the coolant is that would be nice to be anodized, the outside is just cosmetic .
Really depends on what look you're after...do you like shiny things ?
Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1
Quote from: dodj on February 03, 2023, 05:33:58 AM
Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1
good prices here as well...direct form the manufacturer.
https://shop.championcooling.com/Performance-Radiators
My plan is to go this route if my loaner 26 inc works in the spring.
Jason
Quote from: Cudajason on February 03, 2023, 06:49:03 AM
Quote from: dodj on February 03, 2023, 05:33:58 AM
Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1
good prices here as well...direct form the manufacturer.
https://shop.championcooling.com/Performance-Radiators
My plan is to go this route if my loaner 26 inc works in the spring.
Jason
Even better prices here. https://www.championradiators.com/
Quote from: blown motor on February 03, 2023, 07:20:57 AM
Even better prices here. https://www.championradiators.com/
Make sure to read the whole listing. Copied from "Barracuda (70-74) 22" Small Block...
Bracket Mounted
(No OEM Shroud support)13lb. Radiator Cap included
Transmission Cooler Included (1/8- 27NPT)
Aluminum Shroud available for two 10" Electric Fans (sold separately)
Note: This radiator is shorter than OEM(To fit Multiple Mopar cars)
Quote from: blown motor on February 03, 2023, 07:20:57 AM
Quote from: Cudajason on February 03, 2023, 06:49:03 AM
Quote from: dodj on February 03, 2023, 05:33:58 AM
Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1
good prices here as well...direct form the manufacturer.
https://shop.championcooling.com/Performance-Radiators
My plan is to go this route if my loaner 26 inc works in the spring.
Jason
Even better prices here. https://www.championradiators.com/
Yeah, I have seen that site too. I think difference is in the shipping costs!
Quote from: Jay Bee on February 03, 2023, 07:30:11 AM
Quote from: blown motor on February 03, 2023, 07:20:57 AM
Even better prices here. https://www.championradiators.com/
Make sure to read the whole listing. Copied from "Barracuda (70-74) 22" Small Block...
Bracket Mounted
(No OEM Shroud support)
13lb. Radiator Cap included
Transmission Cooler Included (1/8- 27NPT)
Aluminum Shroud available for two 10" Electric Fans (sold separately)
Note: This radiator is shorter than OEM
(To fit Multiple Mopar cars)
@Jay Bee (https://forum.e-bodies.org/mlist/jay-bee_351) The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.
Quote from: blown motor on February 03, 2023, 09:45:53 AM
Quote from: Jay Bee on February 03, 2023, 07:30:11 AM
Quote from: blown motor on February 03, 2023, 07:20:57 AM
Even better prices here. https://www.championradiators.com/
Make sure to read the whole listing. Copied from "Barracuda (70-74) 22" Small Block...
Bracket Mounted
(No OEM Shroud support)
13lb. Radiator Cap included
Transmission Cooler Included (1/8- 27NPT)
Aluminum Shroud available for two 10" Electric Fans (sold separately)
Note: This radiator is shorter than OEM
(To fit Multiple Mopar cars)
@Jay Bee (https://forum.e-bodies.org/mlist/jay-bee_351) The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.
Murray are you shipping that in the US? if so, do you mind sharing the shipping cost?
Thanks
Jason
Just a heads up, Champion Radiators are available on Amazon as well :alan2cents:
The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.
Thanks
Jason
I was going to call Champion on Monday, but till then I saw where the website offered an upgrade to three and four row tubes, but it didn't say what size tubes. Do they remain one inch?