Need opinions on radiator

[blown motor]

I'm replacing the rad in the Charger with a higher capacity one. The question is do I go with standard aluminum like I have now or black anodized?

[Brads70]

I would say it depends on what's actually anodized ? If the inside of the tubes are then I might go for it other wise if it's just the tanks I'd just used black BBQ paint. Cheap and easy to touch up if needed.
It's the inside where the coolant is that would be nice to be anodized, the outside is just cosmetic .

[anlauto]

Really depends on what look you're after...do you like shiny things ?

[dodj]

Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1

[Cudajason]

Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1

good prices here as well...direct form the manufacturer.

https://shop.championcooling.com/Performance-Radiators

My plan is to go this route if my loaner 26 inc works in the spring.

Jason

[blown motor]

Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1

good prices here as well...direct form the manufacturer.

https://shop.championcooling.com/Performance-Radiators

My plan is to go this route if my loaner 26 inc works in the spring.

Jason

Even better prices here. https://www.championradiators.com/

[Jay Bee]

Even better prices here. https://www.championradiators.com/

Make sure to read the whole listing. Copied from "Barracuda (70-74) 22" Small Block...

Bracket Mounted
(No OEM Shroud support)

13lb. Radiator Cap included
Transmission Cooler Included (1/8- 27NPT)
Aluminum Shroud available for two 10" Electric Fans (sold separately)

Note: This radiator is shorter than OEM
(To fit Multiple Mopar cars)

[Cudajason]

Standard aluminium.
This is the one I have, Tabs fit a stock fan shroud with 'wee tad' of ingenuity. Said in an "Ian" accent...lol
https://www.jegs.com/i/Champion-Cooling-Systems/166/CC375/10002/-1

good prices here as well...direct form the manufacturer.

https://shop.championcooling.com/Performance-Radiators

My plan is to go this route if my loaner 26 inc works in the spring.

Jason

Even better prices here. https://www.championradiators.com/

Yeah, I have seen that site too. I think difference is in the shipping costs!

[blown motor]

Even better prices here. https://www.championradiators.com/

Make sure to read the whole listing. Copied from "Barracuda (70-74) 22" Small Block...

Bracket Mounted
(No OEM Shroud support)

13lb. Radiator Cap included
Transmission Cooler Included (1/8- 27NPT)
Aluminum Shroud available for two 10" Electric Fans (sold separately)

Note: This radiator is shorter than OEM
(To fit Multiple Mopar cars)

@Jay Bee  The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.

[Cudajason]

Even better prices here. https://www.championradiators.com/

Make sure to read the whole listing. Copied from "Barracuda (70-74) 22" Small Block...

Bracket Mounted
(No OEM Shroud support)

13lb. Radiator Cap included
Transmission Cooler Included (1/8- 27NPT)
Aluminum Shroud available for two 10" Electric Fans (sold separately)

Note: This radiator is shorter than OEM
(To fit Multiple Mopar cars)

@Jay Bee  The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.

Murray are you shipping that in the US?  if so, do you mind sharing the shipping cost?

Thanks

Jason

[anlauto]

Just a heads up, Champion Radiators are available on Amazon as well 

[Jay Bee]

@Jay Bee  The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.

Okie dokie, sounds like you're all set. I guess with the 3 tubes the 13lb rad cap will be OK   

[blown motor]

@Jay Bee  The rad I'm getting measures exactly the same as the rad that's in the car now except the new one will have a thicker core and three tubes instead of two.

Okie dokie, sounds like you're all set. I guess with the 3 tubes the 13lb rad cap will be OK   

I'll put a 16lb cap on it.

[blown motor]

Murray are you shipping that in the US?  if so, do you mind sharing the shipping cost?

Thanks

Jason

@Cudajason  Ya, I'll have it shipped to Rochester and bring it back myself. Are you getting one too?

[Cudajason]

Murray are you shipping that in the US?  if so, do you mind sharing the shipping cost?

Thanks

Jason

@Cudajason  Ya, I'll have it shipped to Rochester and bring it back myself. Are you getting one too?

yeah likely, but not until the spring.