Hello Everyone
Just brought home my new project car my dad has owned this 70 challenger since 1972 I am now the 3rd owner I received it after he passed away last december. Looking forward to the restoration process and returning this car to its old glory. Lots of Memories!!
:welcome: from central New York! good luck and my condolences. tell us more about the car. :ohyeah:
Sorry to hear of your father's passing.... Looks like he left you a very cool project... Welcome!!! Lotta guys here have been through these cars bumper to bumper so if you have any questions just ask... Looks like the drivers side is buckled pretty good, you might want to have the frame alignment checked before you dig to deep..... My car had a little twist in one rail.... Fixed it before metal replacement so everything was straight & everything fit as it should...
Welcome from Hamilton. Ont. You have a great project there. Sorry to hear about your dad.
:welcome: to the forum @best47! Nice project car! Sorry for your loss! Lots of good information and knowledgeable members willing to help out on anything you might have questions on! We are gluttons for information on new member's cars, so give us a rundown on all the bells and whistles, and we always love lots of pictures! Got any photo of the fender tag? Are you lucky enough to have broadcast sheet, too?
Inquiring minds want to know! LOL
:handshake:
:welcome: From Sylmar, CA
welcome to the site , My condolences on losing your Dad hard way to get a car but you have the car & memories :twothumbsup: :wrenching:
:wave: Welcome aboard from Ontario :canada:
Welcome to the best forum online, a lot of knowledge here, sorry about the loss of your father, its tough. Look forward to seeing your build..
I will get a picture of the tag tonight and pull the rear seat and see if there is a broadcast sheet.
Quote from: Best47 on September 13, 2018, 01:41:30 PM
I will get a picture of the tag tonight and pull the rear seat and see if there is a broadcast sheet.
I've found more in the front seat backs then rear seats, remove the two screws & you can look with a flashlight....... But rear seats are worth a look too.....
Welcome from Michigan . . Glad you signed up! :wave:
Here you go....some incentive....
:welcome:
Welcome aboard!
Sorry for your loss but every time you work on that car you'll think of your dad.
Welcome from B.C. Canada. Great car to restore.
Welcome from N. Dakota :handshake:
Cool project!
Welcome!
Great to know it's a family heirloom.
Looking forward to seeing your progress.
Quote from: anlauto on September 13, 2018, 05:34:46 PM
Here you go....some incentive....
That should motivate him.... 8) :yes:
Welcome to the site from Ontario, :canada: and good luck with the restoration. There are subframe specs somewhere here and you'd be well advised to check out how yours meets them what with that "pop" in the lft frt. :wave:
A warm welcome :welcome: glad you joined the forum :grouphug:
:iagree:
Sorry about your father. Hopefully the car will bring back fond memories and help you remember and be with your father.
Got a pic of the fender tag and decoded it here it is.
FJ5 is a great color! :inlove:
Welcome from PA Great to have you here. Sorry about your dad's passing, but he would be very proud of you when you get that done. Best of luck with the restoration. P.S. prepared for the E-Body parts sticker shock. :welcome:
:welcome: to the site :cheers:
Welcome beautiful car to restore and great memories along the way cheers :australia: