E-Bodies.org Cuda Challenger Forum

Hi, I am trying to find the actual Manufacturer /Importer of the Non Fresh Air Version of the Reproduction Steel, Six Pack Air Cleaner.

This Version features the prominent water dam at the front.

https://photos.app.goo.gl/i5w9JEGfGjBVJmkr8 (https://photos.app.goo.gl/i5w9JEGfGjBVJmkr8) photo link

https://photos.app.goo.gl/8eGtb7uw6eBVvT9j6 (https://photos.app.goo.gl/8eGtb7uw6eBVvT9j6) photo link

I am seeing the part (Kit - base and lid) sold as:

MN1013         Classic Industries

P4529057AB   Mopar Performance - Fuel Catalogue ...... This is a Mopar Classic Restoration Part and I believe that it is an official Mopar Licensed Part

P4529057AE   Jegs

P4529057AC   Summit Racing

The base alone, was originally sold as  #3418717

Why? I want to get my hands on the "Water Dam Pressing" of the Six Pack Version in order to add it to a 121-AG6PA Mopar 1969 B-body Air Grabber, 1969-70 Ramcharger (440) Air Cleaner base, now that I have a single Throttle Body EFI setup.

Both these parts are reproduction so no original parts will be damaged. First I need to find out who is making the Non Fresh Air Pressings

PG Classics say they do not make them. pgclassic@hotmail.com

Mike Rachuy at Tri Licensing couldn't help either mrachuy@trilicensing.com

Anyone?

Quote from: Cuda Cody on June 05, 2020, 12:43:08 PM
David is david.radcliffe@golling.com

Thank you.

I wouldn't bother with Snobar or Art from 6 pack.
Snobar supplied Art with air cleaners, but just the ones he had manufactured overseas
Snobar never carried those nor do they now.
This is what you are looking for but I doubt the manufacturer would sell one separate.
I've been down that road, but perhaps you'll get lucky.

Unfortunately Mopar has discontinued both versions of this kit 11-2019. I do not recall who the manufacturer was. If may be easier to find a member on the forum that has one and ask them to make a cardboard template and mail it to you.

Quote from: mccannix on June 05, 2020, 01:19:06 PM.
This is what you are looking for but I doubt the manufacturer would sell one separate.
I've been down that road, but perhaps you'll get lucky.

Thanks mccannix

Yes that is exactly the part I am trying to find. Do you still have it?  :wowzers:

Is there any chance you could make a cardboard template or drawing ..... I appreciate it wouldn't be easy what with curved shape etc.

Rgds

Quote from: MoparDave on June 05, 2020, 01:22:16 PM.

It may be easier to find a member on the forum that has one and ask them to make a cardboard template and mail it to you.

Can anyone help?

Quote from: mccannix on June 05, 2020, 01:19:06 PM
Snobar never carried those nor do they now.

So we still don't know where this part was/is made?

Sorry but I dont have that part anymore.
I'm sure someone here must have one.

Quote from: mccannix on June 05, 2020, 06:20:59 PM
Sorry but I don't have that part anymore. I'm sure someone here must have one.

Thanks for that mccannix 

I'm certain that you are correct, it's just something of a needle in a hay stack!

Any ideas who I could try? I have just about exhausted my phone book.

Rgds

Quote from: JacbJacb on June 05, 2020, 03:19:01 PM]
So we still don't know where this part was/is made?

Does anyone has an email address for a suitable contact within Mopar Performance?

mopar will NOT divulge any vendor/supplier information not even to a dealership.  your better off at this point to either make one or buy a base plate.

https://www.ebay.com/itm/Vintage-Dodge-Mopar-Performance-440-Six-Pack-Air-Cleaner-assembly-Original/193541988541?hash=item2d100060bd:g:UnkAAOSwat9ecM4l

Quote from: MoparDave on July 01, 2020, 07:53:57 AM
mopar will NOT divulge any vendor/supplier information not even to a dealership.

Hi MoparDave

You say Mopar will not divulge any vendor or supplier, well you might care to look at this link https://www.mopar.com/en-us/store/parts/mopar-restoration-parts.html#all (https://www.mopar.com/en-us/store/parts/mopar-restoration-parts.html#all)

Thanks for the link, but I just need the splash shield and that would be an extremely expensive way of getting one .... but thanks anyway.