Print Page - Door jamb need picture

Title: Door jamb need picture
Post by: truckinman466 on August 22, 2020, 02:15:48 PM

So, I finally have everything lined up and screwed together. Time to start welding. On the door jamb do I leave the seam from the quarter panel or is it smooth? Does it get seam sealer? I have to fix where I had to pie cut the quarter. Any pics would be helpful.

Title: Re: Door jamb need picture
Post by: headejm on August 22, 2020, 02:40:53 PM

Do these help? The quarter overlaps the jamb. Not smooth looks like sealer present.

P.S. 1970 Challenger

Title: Re: Door jamb need picture
Post by: truckinman466 on August 22, 2020, 03:22:25 PM

Yes, that helps a lot. Thanks

Title: Re: Door jamb need picture
Post by: Mopar5 on August 22, 2020, 03:30:32 PM

What is that switch below the striker?

Title: Re: Door jamb need picture
Post by: RUNCHARGER on August 22, 2020, 03:34:00 PM

SE door ajar switch.

Title: Re: Door jamb need picture
Post by: Mopar5 on August 22, 2020, 05:05:49 PM

Quote from: RUNCHARGER on August 22, 2020, 03:34:00 PM
SE door ajar switch.

👍

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: truckinman466 on August 22, 2020, 02:15:48 PM