Changed the ECU dizzy out and put a true dual point (with Petronix) in, so no longer need the ECU box, but I'll have two bolt holes, any ideas on what I can do? Rubber plugs? plastic snap in grommets?
Do you have any touch up paint ?
I just threaded the bolt back in the hole. I'm sure there are more attractive solutions but this worked easily.
I was just going to say you could use some sort of paintable sealer to fill the holes as smooth as you could then just brush on some body colour :dunno:
Or put tape on the backside, hit them with a little filler and some hand sanding....followed by touch up paint :dunno: