does anyone have the hole pattern & dimensions for the fender turn signal indicators for a '73 Challenger? :help:
@Burdar (https://forum.e-bodies.org/mlist/burdar_173)
Sorry, I do not. That was one of the things I messed up on my car. I had a 72 fender that I was going to use until I decided to use Goodmark fenders. The body shop used that 72 fender to drill the fender mount turn signal holes. :'(
We had to use an air grinder to open up one hole to 73 size AFTER the car was painted. The other hole was too large since 73 uses a screw to attach the turn signals instead of a stud/nut. Since I couldn't use a screw I bought two philips head machine screws and used a nut to attach them. They look correct from up top but they aren't attached correctly underneith.
Are the hole locations different from a 1970 challenger?
Yes. 73 and 74 have one very large hole and one small hole for the attaching screw.
I can take some dimensions and measurements tomorrow from my 74 if that helps you.
Quote from: three two barrels on June 11, 2021, 04:43:23 PM
I can take some dimensions and measurements tomorrow from my 74 if that helps you.
thanks, that would/should be the same! :twothumbsup: