Well guys and gals, since my stay in the hospital, I can't do much anymore but watch TV and be on this puter all day. Most of you don't have the time to research looking for the parts you need. Well, I do. And I need your help to keep me busy. So if you need something, PM me, or post it here, and I'll be on it. I'll forward links I find, if its local to me I'll go get it and send it to you. You can E Mail me @ roadman5312@aol.com. I don't want anything for doing this, just trying to stay busy.
@Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) pin this if OK. Thanks ya'll :rebelflag"
Keep an eye out of a 71 Javelin , close to me would be good! ;)
Quote from: Brads70 on October 05, 2017, 05:32:41 PM
Keep an eye out of a 71 Javelin , close to me would be good! ;)
Man I been looking for a long time, it's on my list :drinkingbud:
Quote from: Roadman on October 05, 2017, 05:37:58 PM
Quote from: Brads70 on October 05, 2017, 05:32:41 PM
Keep an eye out of a 71 Javelin , close to me would be good! ;)
Man I been looking for a long time, it's on my list :drinkingbud:
Hell's bells Mark, they only sold 12 of them, didn't they? :Stirring:
What a great idea Mark!
Rear view mirror for a 74 Challenger. Don't need the base or stem. Glass needs to be pin, mine has some silver issues as so many of them do.
Interior door handles. Mine are scratched and pitted.
Passenger side under dash trim for A/C car. I know these are very hard to find, I've been looking.
I'll think of more. Items must be near perfect or else I'll just buy repops when I get tired of looking.
Thanks buddy. :cheers:
definitely cool to keep your mind working.
I'm always looking for M46 scoops. :takemymoney: :takemymoney:
red interior plastics and tan interior plastics.
A complete set of V5x in any color. Especially color. Or pieces in perfect shape.
I sure enjoy your picture threads. That visual stimuli is a large part of why I am around. Thanks :cheers:
Very neat and generous offer!!!! :ebay:
Hope your doing fine and great to offer your help.
You will be a big help I'm sure of that!! I'm looking for NOS glove box, console, and trunk lock cylinders. Also a 70 non remote chrome ralley mirror. Thanks for the help!
Sorry to hear you are stuck in the hospital. Hope for a speedy recovery. I'll look for my list. Right now all I can think of is the driver front window weatherstrip for vert top, the L bracket for pass rear interior quarter panel along floor, :thinking:
Quote from: 61K T/A on October 06, 2017, 03:11:13 AM
You will be a big help I'm sure of that!! I'm looking for NOS glove box, console, and trunk lock cylinders. Also a 70 non remote chrome ralley mirror. Thanks for the help!
Can't tell if this is a ralley mirror. http://www.ebay.com/itm/1970-Dodge-Challenger-Chrome-Exterior-driver-side-Mirror-OME-used-/272866244941?hash=item3f8818794d:g:4kgAAOSwLzZZzTjK&vxp=mtr
Well, you guys don't want much, do ya :rofl: :haha: OK, I made a list this morning, if I liked your post it's on the list. Just to clarify, I'm not still in the hospital, just came out in bad shape. When I find something on the list I'll post it here, so check in daily. Thanks guys. :rebelflag" As I search I'll also post parts I find that are always being searched that are a good price. :bradsthumb:
Very nice offer Mark!
I need stuff, but I just gotta find more cash first.
My daughter is moving to Los Angeles to go to school, there goes my money for now....
Not on list, 70 Cuda rocker mouldings. https://sarasota.craigslist.org/pts/d/1970-cuda-barracuda-rocker/6334246041.html :rebelflag"
OK, spent the morning setting up saved searches and alerts . Now , I don't know these parts as well as many of you guys, so if I post something thats wrong, please quote it and let me know for future reference. Also if you buy something, let me know so I can remove it from the list. Thanks for the help guys, the morning flew right by. :rebelflag"
Awesome Mark
Let us know how we can help you OK :slapme5:
These are more reasonable /h
ttp://www.ebay.ca/itm/2-VINTAGE-CHRYSLER-MOPAR-CAR-DOOR-LOCKS-AND-KEY-1970S-80S-LOOK-NICE-WORK-/272869856228?hash=item3f884f93e4:g:DOYAAOSwNM9Z0QLp
http://www.ebay.ca/itm/2-VINTAGE-CHRYSLER-MOPAR-CAR-DOOR-IGNITION-LOCKS-AND-KEY-1970S-80S-WORK-/272869859891?hash=item3f884fa233:g:8P4AAOSw8fpZ0QOs
http://www.ebay.ca/itm/1970-1971-Plymouth-Dodge-Mopar-Ignition-Door-Trunk-Locks-/192176222545?hash=item2cbe987151:m:mfyQPTAgZyl1-QCsgf_O62A&vxp=mtr
http://www.ebay.ca/itm/MOPAR-1970-71-ALL-Ignition-and-Door-Locks-w-Keys-Charger-Super-Bee-Dart-Cuda-/182754610199?hash=item2a8d060c17:g:7PoAAMXQdwpRi-nR&vxp=mtr
Brigg & Stratton made the original locks so you can look for them too , Standard has been producing them lately also
NOS was Briggs & Stratton :bigthumb:
Quote from: soundcontrol on October 06, 2017, 06:58:25 AM
I just gotta find more cash first.
My daughter is moving to Los Angeles to go to school, there goes my money for now....
Maybe this?
@soundcontrol (https://forum.e-bodies.org/mlist/soundcontrol_67)
Quote from: Brads70 on October 05, 2017, 05:32:41 PM
Keep an eye out of a 71 Javelin , close to me would be good! ;)
really Brad, after all else .... :pokeeye:
:haha:
I've resisted posting this .... but since you asked .... https://fortcollins.craigslist.org/cto/d/1971-amc-javelin/6302160879.html or if a '69 would do it for you .... https://denver.craigslist.org/cto/d/1969-javelin-sst-for-sale/6316264390.html
I wonder what the price would be without the 350/350 ??
You just need a different hobby, but still related to Mopars. Can you build stuff like this?
This could be eco friendly!
Quote from: Cudakiller70 on October 07, 2017, 09:39:16 AM
You just need a different hobby, but still related to Mopars. Can you build stuff like this?
This could be eco friendly!
Those look like wedding gifts for the guy getting married in the other thread... :haha:
Quote from: Cudakiller70 on October 07, 2017, 09:39:16 AM
You just need a different hobby, but still related to Mopars. Can you build stuff like this?
This could be eco friendly!
Yea, once I get organized I;m thinking along those lines. Or something similar. Thanks. :rebelflag"
Quote from: Chryco Psycho on October 06, 2017, 10:46:25 PM
I wonder what the price would be without the 350/350 ??
;) That was my first thought too. Then also without the led lights , stereo, etc.... :)
Quote from: ec_co on October 06, 2017, 08:33:54 PM
Quote from: Brads70 on October 05, 2017, 05:32:41 PM
Keep an eye out of a 71 Javelin , close to me would be good! ;)
really Brad, after all else .... :pokeeye:
:haha:
I've resisted posting this .... but since you asked .... https://fortcollins.craigslist.org/cto/d/1971-amc-javelin/6302160879.html or if a '69 would do it for you .... https://denver.craigslist.org/cto/d/1969-javelin-sst-for-sale/6316264390.html
:bradsthumb: A little far, but thanks, gives me an idea what they are going for. Keep them coming!
I'd bite on this if it was close...... :('
https://sfbay.craigslist.org/sby/cto/d/amc-javelin-sst-1971-project/6334441164.html
Quote from: Brads70 on October 07, 2017, 04:26:34 PM
I'd bite on this if it was close...... :('
https://sfbay.craigslist.org/sby/cto/d/amc-javelin-sst-1971-project/6334441164.html
Dang Brad, that deal will never come around again. Wow, just wow. :banana: :rebelflag"
There's enough stuff there to get all your money back just selling what you don't need :alan2cents: :rebelflag"
Roadman, nice find. That one looks to be in great shape.
Alan, mine has a couple holes drilled in it where a PO attached something. That's why I want to replace it. Don't want to replace it with a cracked one.
Fair enough...The map light just screws on/off.
Quote from: anlauto on October 08, 2017, 10:12:31 AM
Fair enough...The map light just screws on/off.
:rebelflag" :iagree:
Just went and looked at mine. I understand it now. I'll let you know how this turns out.
Quote from: blown motor on October 08, 2017, 10:22:52 AM
Just went and looked at mine. I understand it now. I'll let you know how this turns out.
It sold, you get it Murray ?
@blown motor (https://forum.e-bodies.org/mlist/blown-motor_52)
That was a super cheap price compared to the others on EBay. If Murray didn't get it, someone else got a good deal. :alan2cents:
I got it but now I'm having trouble making payment through Ebay. :pullinghair: Trying to work that out.
Wait until EBay gets involved with the international shipping costs :o
I'm having it shipped to Michigan Alan.
Working with seller on payment. Looks like we'll do it directly. Waiting for his call.
Payment complete. I got it for 145.
Mark, thank you so much for your help. :handshake:
Quote from: blown motor on October 09, 2017, 08:31:28 AM
Payment complete. I got it for 145.
Mark, thank you so much for your help. :handshake:
My pleasure Murray. Still looking for your mirror and door handles. :rebelflag"
Same posting on both for the interior panel
Quote from: Chryco Psycho on October 09, 2017, 12:34:15 PM
Same posting on both for the interior panel
Thanks CP, I fixed it. :rebelflag" :cheers:
Mark, I'm also looking for the front valence trim. Work your magic buddy. :fingerscrossed:
Quote from: blown motor on October 09, 2017, 03:00:23 PM
Mark, I'm also looking for the front valence trim. Work your magic buddy. :fingerscrossed:
Josh has new, https://www.musclecarparts.cc/shop/item.aspx/1972-1974-dodge-challenger-front-valance-trim-molding/9139/ Or do you want me to look for used ? Wish we could get Josh as a sponsor.
@blown motor (https://forum.e-bodies.org/mlist/blown-motor_52)
I didn't realize Josh's was carrying them. Last I knew only Laysons had them and I think they were $239. ie. too much.
Lets see if there are any really good used ones out there.
In search of either a '70, or a '71 (no gills) Barracuda Right front fender. Preferably here in Florida, i'll drive to pick it up!
Quote from: EB3-GranCoupe on October 09, 2017, 04:27:09 PM
In search of either a '70, or a '71 (no gills) Barracuda Right front fender. Preferably here in Florida, i'll drive to pick it up!
I'm on it Matt. If we get a good hit I'll go it if you can't. https://orlando.craigslist.org/pts/d/wanted-1970-or-71-cuda-no/6339760391.html Thanks. :rebelflag" Notice I put in the the forum link.
@Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) Can't hurt .
Green dash trim http://www.ebay.com/itm/1970-1971-1972-1973-1974-barracuda-challenger-right-dash-trim-green-/311977066662?hash=item48a34840a6:g:VhoAAOSwLWBZhiEP&vxp=mtr
I could use the wood grain trim for my gran coupe, door and quarter trim. as mine is missing all of it. :thankyou: Mark.
: UPDATE : First, I want to thank you guys for keeping me busy. Since I can't do much else, this is the next best thing to being able to work on a car.
We had a few home runs, and still looking everyday for all that hasn't been found. Please remember that if you found what your looking for, either from this thread or elsewhere, please let me know so I can take it off the list.
I'm going to start another thread for interior parts ( plastics ) of color ( Reds, Blues, Greens, Tans, etc. ) that I trip over as I scour the web. It will also include convertible parts.
Anyway, thanks again, and keep em coming. I'm on the job. :rebelflag" :unitedstates:
Quote from: Roadman on October 10, 2017, 04:25:45 PM
: UPDATE :
I'm going to start another thread for interior parts ( plastics ) of color ( Reds, Blues, Greens, Tans, etc. ) that I trip over as I scour the web. It will also include convertible parts.
awesome !!
I have a "friend" who needs a e-body battery filter and horn fluid. If you could find some cross drilled brake hoses to go with his cross drilled rotors, that would be cool too!
Quote from: Roadman on October 09, 2017, 03:20:24 PM
Quote from: blown motor on October 09, 2017, 03:00:23 PM
Mark, I'm also looking for the front valence trim. Work your magic buddy. :fingerscrossed:
Josh has new, https://www.musclecarparts.cc/shop/item.aspx/1972-1974-dodge-challenger-front-valance-trim-molding/9139/ Or do you want me to look for used ? Wish we could get Josh as a sponsor. @blown motor (https://forum.e-bodies.org/mlist/blown-motor_52)
I see that Roseville has them now too.
I know it`s not E-body but I need 4 speed parts for my `73 road runner - big block bellhousing, clutch fork, transmission, shifter and linkage for a bench seat car.
Quote from: torredcuda on October 13, 2017, 06:36:35 AM
I know it`s not E-body but I need 4 speed parts for my `73 road runner - big block bellhousing, clutch fork, transmission, shifter and linkage for a bench seat car.
Clutch fork http://www.ebay.com/itm/MOPAR-B-E-BIG-BLOCK-A-BODY-4-SPEED-FORK-4-SPEED-DART-CUDA-ROADRUNNER-CHARGER/331698422725?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D41376%26meid%3D184ce697363a49acb94799baccc472f8%26pid%3D100005%26rk%3D2%26rkt%3D6%26sd%3D292289182383&_trksid=p2047675.c100005.m1851
Quote from: torredcuda on October 13, 2017, 06:36:35 AM
I know it`s not E-body but I need 4 speed parts for my `73 road runner - big block bellhousing, clutch fork, transmission, shifter and linkage for a bench seat car.
400 engine ?? Pistol Grip ??
@torredcuda (https://forum.e-bodies.org/mlist/torredcuda_122)
yes, 400 4spd, Pistol Grip for a bench seat as the console one is different.
pic of shifter and linkage here - http://www.forbbodiesonly.com/moparforum/threads/1973-road-runner-400-4-speed-parts.139190/
Quote from: torredcuda on October 13, 2017, 09:21:17 AM
pic of shifter and linkage here - http://www.forbbodiesonly.com/moparforum/threads/1973-road-runner-400-4-speed-parts.139190/
Great, I was confused about that bracket on the shifter, now I know.
Quote from: torredcuda on October 13, 2017, 09:13:10 AM
yes, 400 4spd, Pistol Grip for a bench seat as the console one is different.
Shifter bracket http://www.ebay.com/itm/Mopar-71-74-B-Body-Bench-Seat-4-Speed-Shifter-Mount-Bracket-Charger-RoadRunner-/253205985247?hash=item3af440b7df:g:L4AAAOSwOKVZ0wDV&vxp=mtr
Ya, worth checking out but depends what shipping would cost I guess.
the bench seat 4 spd shifter uses the forward B body mount plate , Brewers & Passon will have them
I'm getting my restored AC parts back finally, after almost 3 months. I need the bracket that mounts the AC dryer to the passenger side inner fender on a '70 Challenger.
I could use an original passenger side T/A muffler strap too, and the trans to steering column reverse lockout components as mine disappeared when the car was off in restoration shop jail.
Wants $500 shipped without the boot, going price for these, been a while since I bought a Pistol Grip?
Quote from: cuda hunter on October 05, 2017, 08:05:04 PM
definitely cool to keep your mind working.
I'm always looking for M46 scoops. :takemymoney: :takemymoney:
red interior plastics and tan interior plastics.
A complete set of V5x in any color. Especially color. Or pieces in perfect shape.
I sure enjoy your picture threads. That visual stimuli is a large part of why I am around. Thanks :cheers:
@cuda hunter (https://forum.e-bodies.org/mlist/cuda-hunter_176) I was contacted on FB has red interior panels removed 30 years ago, put in his attic. I'll get his contact info and let you know.
Just saw this. I will call. Thanks a ton.
OK ya'll, I'm on this daily. I have more alerts set up than the FBI and CIA combined :haha: :veryexcited: Every lead I get I tag you and post, regardless of price. Thats your call. And I search twice a day. But once you have gotten to a certain point in searching " Newly Listed " it slows down.
Sooooo, I'm going to open this up a bit. I know that some of you have non E-Body cars that you have, or want. Like @Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) & @J-Code Jeni (https://forum.e-bodies.org/mlist/j-code-jeni_5) have a BMW Isetta I think, @cuda hunter (https://forum.e-bodies.org/mlist/cuda-hunter_176) is a Firebird fan. Either way, you need parts for anything, post it here.
I'm very well versed in Fords 60's and 70's, AMC's , Buick, Olds, etc. So thanks for keeping me busy, post what you need. :rebelflag"
I'll test you on that.
I'm looking for a set of 1969 pontiac grand prix parchment door panels with manual windows.
Would take rears as well. This is something I've been looking for around 15 years. For my original gold 428 model J grand prix.
Always looking for a 69 4 speed grand prix. VERY few made. Any motor any color any shape (almost).
Just saying.
Your opening a can of worms here.
Quote from: cuda hunter on October 23, 2017, 06:42:16 PM
I'll test you on that.
I'm looking for a set of 1969 pontiac grand prix parchment door panels with manual windows.
Would take rears as well. This is something I've been looking for around 15 years. For my original gold 428 model J grand prix.
Always looking for a 69 4 speed grand prix. VERY few made. Any motor any color any shape (almost).
Just saying.
I'm on it, the worms are helping me. :haha: :rebelflag"
Please don't start posting links to EBay or Craigslist ads for every make and model here on our E Body web site...Nop need for that.... :alan2cents:
Quote from: anlauto on October 23, 2017, 07:39:09 PM
Please don't start posting links to EBay or Craigslist ads for every make and model here on our E Body web site...Nop need for that.... :alan2cents:
No prob.
All non E Body needs, send me a PM. Will reply with PM. :rebelflag"
Good find! Thanks. I will follow up on these!
Quote from: MikeMikeMike on October 26, 2017, 06:39:03 AM
Good find! Thanks. I will follow up on these!
First ones I've seen anywhere.
I had to sit back and think real hard as that price was really high for 4 little brackets but I guess if I can sell off the ones I don't use from the set it gets a little more reasonable. And like you said, I haven't seen any around and I'm getting to crunch time on getting this car done. The kids are beyond annoyed that I sold the dodge and they ask weekly about the cuda being ready for next summer... yes? maybe?
Anyway, I bought the brackets so you can take that off your list. Thanks for finding those! :cheers:
Quote from: MikeMikeMike on October 26, 2017, 12:35:38 PM
I had to sit back and think real hard as that price was really high for 4 little brackets but I guess if I can sell off the ones I don't use from the set it gets a little more reasonable. And like you said, I haven't seen any around and I'm getting to crunch time on getting this car done. The kids are beyond annoyed that I sold the dodge and they ask weekly about the cuda being ready for next summer... yes? maybe?
Anyway, I bought the brackets so you can take that off your list. Thanks for finding those! :cheers:
You know I search about 4 hours a day for ya'lls parts and I was amazed that these are the first ones that popped up. Then I saw the price :o But my job is finding the stuff. :yes: Anyway, glad I could help. :rebelflag"
Quote from: JH27N0B on October 13, 2017, 06:10:45 PM
I'm getting my restored AC parts back finally, after almost 3 months. I need the bracket that mounts the AC dryer to the passenger side inner fender on a '70 Challenger.
I could use an original passenger side T/A muffler strap too, and the trans to steering column reverse lockout components as mine disappeared when the car was off in restoration shop jail.
Hey
@JH27N0B (https://forum.e-bodies.org/mlist/jh27n0b_308) you still need the dryer bracket ? I got a hit.
The shop told me the other day they found a dryer bracket for my car. The car is going back to the shop soon, I'll let you know if the one he found turns out to be wrong. Thanks! :bigthumb:
:rebelflag" Just want ya'll to know I'm still on the job, twice a day. If you need something, post it.
Good to see you are keeping busy Mark. Here is an item I have advertised for, but no luck as yet. I am in search of the AC plenum/duct adapter that attaches to the main heat heater/ac box and connects the duct to the driver side ac vent.
Any help is greatly appreciated. :cheers:
Quote from: 71GranCoupe on November 07, 2017, 09:52:43 AM
Good to see you are keeping busy Mark. Here is an item I have advertised for, but no luck as yet. I am in search of the AC plenum/duct adapter that attaches to the main heat heater/ac box and connects the duct to the driver side ac vent.
Any help is greatly appreciated. :cheers:
This it ? https://www.ebay.com/itm/1970-71-72-73-74-Challenger-Cuda-Heater-A-C-Box-Lower-Cover-2936597/322862946058?hash=item4b2c21970a:g:QPAAAOSw1DtXJA1t&vxp=mtr
Quote from: Roadman on November 07, 2017, 10:15:27 AM
Quote from: 71GranCoupe on November 07, 2017, 09:52:43 AM
Good to see you are keeping busy Mark. Here is an item I have advertised for, but no luck as yet. I am in search of the AC plenum/duct adapter that attaches to the main heat heater/ac box and connects the duct to the driver side ac vent.
Any help is greatly appreciated. :cheers:
This it ? https://www.ebay.com/itm/1970-71-72-73-74-Challenger-Cuda-Heater-A-C-Box-Lower-Cover-2936597/322862946058?hash=item4b2c21970a:g:QPAAAOSw1DtXJA1t&vxp=mtr
That is another part that is often missing, but seems more plentiful. I have an extra one if someone needs it. The one I am looking for is a little smaller. :thankyou:
:rebelflag" Cool, it's on my list. :bradsthumb:
Hey, thanks Mark. :cheers:
still looking for that `73 road runner Pistol Grip set up for a bench seat as I wasn`t able to work a deal on the one you found a while back.
Quote from: torredcuda on November 20, 2017, 08:15:36 AM
still looking for that `73 road runner Pistol Grip set up for a bench seat as I wasn`t able to work a deal on the one you found a while back.
Oh shoot, I thought you got that one. Back on the list. :cheers:
Quote from: blown motor on October 05, 2017, 07:08:47 PM
What a great idea Mark!
Rear view mirror for a 74 Challenger. Don't need the base or stem. Glass needs to be pin, mine has some silver issues as so many of them do.
Interior door handles. Mine are scratched and pitted.
Passenger side under dash trim for A/C car. I know these are very hard to find, I've been looking.
I'll think of more. Items must be near perfect or else I'll just buy repops when I get tired of looking.
Thanks buddy. :cheers:
@blown motor (https://forum.e-bodies.org/mlist/blown-motor_52) Murray, is this the mirror you need ? https://www.ebay.com/itm/CUDA-CHALLENGER-VALIANT-DUSTER-DART-REAR-VIEW-MIRROR-OEM-1972-76/202098819977?hash=item2f0e074389:g:1qYAAOSwR2RZ914N
Hi Mark
Searching for this part of an E body non AC heater box OR a passenger side heater delete fresh air vent, I only need the fresh air vent portion, I don't require the heater portion, so only th part of the box circled in red to the right of the yellow line, if I can get one that's busted up through the heater section that's great as I would trim that off the fresh air portion and glass it over etc
Quote from: Crash520 on December 02, 2017, 01:08:49 PM
Hi Mark
Searching for this part of an E body non AC heater box OR a passenger side heater delete fresh air vent, I only need the fresh air vent portion, I don't require the heater portion, so only th part of the box circled in red to the right of the yellow line, if I can get one that's busted up through the heater section that's great as I would trim that off the fresh air portion and glass it over etc
I've actually been looking for that for awhile. No luck yet. :rebelflag"
Thanks Mark
Roadman, you are number one in my book. :perfect10: I got the part you located in the mail today and it is just the one I was looking for. Also, noticed you helped some new members with calendars, my hats off to you. :perfect10:
Merry Christmas
:cheers:
Quote from: 71GranCoupe on December 14, 2017, 04:14:41 PM
Roadman, you are number one in my book. :perfect10: I got the part you located in the mail today and it is just the one I was looking for. Also, noticed you helped some new members with calendars, my hats off to you. :perfect10:
Merry Christmas
:cheers:
Awesome, glad I could help. MERRY CHRISTMAS . :handshake: :unitedstates: :rebelflag"
Had some good finds last year, if your looking for something, post it up. I'm still on the job. :yessir:
I'm restorating a 73 Challenger and I'm finding that the dash is in really bad shape. The dash pad is cracked and needs restored. One of the previous owners installed auto meter gages and then glued ostrich skin on everything. The glove box is fine but that's about it
What's my best approach to restore the dash without spending $5K? Have you come across any parts that could help?
:o That ostrich skin looks down-right CREEPY !!
Just buy a new one from mopar dave at roseville. Done. And doesn't cost thousands.
Mark just found me another hard-to-find part. Thanks buddy!
I also sent him a request from a friend of mine and he had it in an hour. We had looked and looked with no success.
Mark!
Sorry i have been absent without leave lately! I am still in the market for a Right Front Fender for 70-71 Barracuda. Also, i would like to add to my wish list: a good condition/non-butchered Edelbrock LD340 intake, and a donor 318 block & crank in rebuildable shape. Hopefully all in the Central Florida area for easy pick-up (the manifold can ship from anywhere).
Thanks buddy!
Matt
https://raleigh.craigslist.org/pts/d/1970-plymouth-barracuda/6445218253.html
Roadman Mark
Where are you located?
I have a huge collection in central NC I need help selling.
I am needing a front bumper for a 1973 Challenger.
Could you help me find two hood hinges and a rallye heater control panel for a 71 challenger? Hinges just need to not be structurally rusty. I can blast and paint them. Thanks!!
Quote from: GY3R/T on January 10, 2018, 06:39:28 PM
:o That ostrich skin looks down-right CREEPY !!
Maybe they should have tried Leopard skin instead :haha: :rofl: :stop:
:wrenching: Roadman Thanks for helping everyone out!!! :bigthumb: I have been looking for some parts on the internet that are a bear to find because its not reproduced so I know how time consuming it is. :ebay:
Certainly we all do miss Roadman and all the help he gave members here.
Would be cool if there's anyone willing to take the torch and keep this thread going.
I would volunteer but working takes a bunch of my time up as many of you.
Perhaps we can be a team effort and any of us can assist when somebody inquires on a part on this thread they need. :grouphug:
Looking for a 833a 4spd input shaft 23 spline 25 tooth gear. Mine is very pitted on seal surface and bushing surface even the splines are pitted.
Could really use a rolled lip NOS Drivers side fender for my 70 TA build. And very nice doors please. Thanks for looking out for us.
Also need 70 outboard front seatbelts in black. Thanks for the search! :cheers:
Quote from: Bpret on September 07, 2018, 05:45:57 PM
Looking for a 833a 4spd input shaft 23 spline 25 tooth gear. Mine is very pitted on seal surface and bushing surface even the splines are pitted.
I would contact Wayne @ Brewers