Looking for a passenger RH side Kelsey Hayes KH80012 disc brake caliper for my '70 Cuda. I have the driver LH side see below pictures for reference. Any condition is fine as would I would like to get mine rebuilt anyway. If you have a RH one or a set of KH calipers let me know. Vic
:unitedstates: :rebelflag" https://www.ebay.com/itm/Disc-Brake-Caliper-Premium-Semi-Loaded-Caliper-Front-Right-Centric-141-63015/131743425365?fits=Year%3A1970%7CModel%3ABarracuda&epid=76704973&hash=item1eac852355:g:zi4AAOSwa0VZ-cpD&vxp=mtr
I might have a oem passengers side will check in a few hours when I get home.
Sent from my iPhone using Tapatalk
He's looking for a 1970 "Large Hole" caliper, not the later small hole ones. :alan2cents:
You are right Alan, I'm looking for the "wide mouth" casting. The ones on eBay are most likely the later small opening versions even though pictures show the kh800012 casting.
@FlatlandTA (https://forum.e-bodies.org/mlist/flatlandta_204) thanks for taking a look, let me know
Thats interesting that 2 different calipers can have the same casting #. Learn somethin new every day. :unitedstates: :rebelflag"
Crazy thing is Jim V had a set for sale asking $500 just for the wide mouth calipers & they sold....
Quote from: 1 Wild R/T on December 20, 2017, 02:07:21 PM
Crazy thing is Jim V had a set for sale asking $500 just for the wide mouth calipers & they sold....
Hard to find item seems
Sent from my iPhone using Tapatalk
I'm still doing in depth research on this caliper. How can this part have the same casting # and the same date code and still be different :thinking: It's kinda like that master cylinder Alan is always looking for. It appears these calipers were AAR/TA specific, or maybe big block cars also. Does this show up on the build sheet
@Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) ? This info makes this forum the best. :banana: :unitedstates: :rebelflag"
Not on the sheet that I can recall.
Quote from: Cuda Cody on December 20, 2017, 04:06:42 PM
Not on the sheet that I can recall.
Hmmmm, so it's not specified on the build sheet, but it's a different caliper. :notsure: Makes no sense.
@6bblgt (https://forum.e-bodies.org/mlist/6bblgt_211) can you weigh in on this. ??
I believe the:
casting # KH 80012 is '70 ONLY (BIG clearance)
&
casting # KH 86166 is '71-'72 (small clearance)
I don't think KH 80012 was available both sizes :dunno: but they are interchangeable (just not numbers correct for '70)
Hmm: I have a set of those too. They're buried though and I won't be finding them until spring.
(https://uploads.tapatalk-cdn.com/20171221/e04c65511759872cc3d55b5176193ec3.jpg)(https://uploads.tapatalk-cdn.com/20171221/1945e9f2fbdffeeb07e51ae22c010f57.jpg)(https://uploads.tapatalk-cdn.com/20171221/4e0ff9cde8913b0fdb222c5e76ab2a23.jpg)(https://uploads.tapatalk-cdn.com/20171221/3f80148150c861263a6a76390ff87d81.jpg)
Sent from my iPhone using Tapatalk
That's also a driver's side Flatland, I believe he needs a passenger side. :alan2cents:
Quote from: anlauto on December 21, 2017, 08:40:10 AM
That's also a driver's side Flatland, I believe he needs a passenger side. :alan2cents:
Dislexic it seems
Sent from my iPhone using Tapatalk
I'll hunt you down when I find them.