Text only | Text with Images

E-Bodies.org Cuda Challenger Forum

Technical Shop => Body Shop => Topic started by: Rich G. on June 10, 2018, 05:56:11 AM

Title: Convertible well liner
Post by: Rich G. on June 10, 2018, 05:56:11 AM
Never had a convertible so I don't know how certain things work. ( 70 Challenger ) On the well liner I see it snaps around the back but what do you do with the front part? I happen to look through the back window and saw the motor when the top was up. Didn't seam right. Do you glue it somehow to the car somewhere?
Title: Re: Convertible well liner
Post by: 71vert340 on June 10, 2018, 06:02:22 AM
In my 71, the front slides into a grooved track on the top rear of the rear seat back if I remember correctly.
Terry
Title: Re: Convertible well liner
Post by: 71vert340 on June 10, 2018, 06:16:06 AM
 My Bad. I was thinking of the top boot cover. I'll go out and take a look.
Terry
Title: Re: Convertible well liner
Post by: 71vert340 on June 10, 2018, 06:21:34 AM
 I went out and took a look. It looks like it is glued to the shelf or brace behind the back of the seat. I can't tell how much glue without taking the seat back out as the material edge is hidden by the seat back. The top hold down clips sit on top of the well liner and are bolted through. Mine is original and never been replaced so I can't help you beyond what I can see now.
Terry
Title: Re: Convertible well liner
Post by: anlauto on June 10, 2018, 06:50:24 AM
Yes....it's glued over the top "shelf" and wrapped around a bit so when the seat is in place nothing is open. :alan2cents:
Title: Re: Convertible well liner
Post by: Rich G. on June 10, 2018, 07:00:47 AM
That makes sense. Thanks for the info.
Title: Re: Convertible well liner
Post by: superdave on June 10, 2018, 07:05:53 AM
Quote from: 71vert340 on June 10, 2018, 06:21:34 AM
I went out and took a look. It looks like it is glued to the shelf or brace behind the back of the seat. I can't tell how much glue without taking the seat back out as the material edge is hidden by the seat back. The top hold down clips sit on top of the well liner and are bolted through. Mine is original and never been replaced so I can't help you beyond what I can see now.
Terry
:lurking: "origional and never been replaced"  :unbelievable: You lucky dog, that must be one sweet car!! :banana:
Title: Re: Convertible well liner
Post by: 1ownr on June 10, 2018, 08:14:00 AM
Quote from: anlauto on June 10, 2018, 06:50:24 AM
Yes....it's glued over the top "shelf" and wrapped around a bit so when the seat is in place nothing is open. :alan2cents:

here it is on a cuda

judy

Title: Re: Convertible well liner
Post by: BIGSHCLUNK on June 10, 2018, 09:00:55 AM
 :iagree:   NIKKI looks about the same.... (70 Chally)
Title: Re: Convertible well liner
Post by: Rich G. on June 10, 2018, 04:54:09 PM
Good pic. Time to take the seat out! Thanks for the info
Title: Re: Convertible well liner
Post by: Cuda_mark on June 15, 2024, 05:15:14 PM
Quote from: anlauto on June 10, 2018, 06:50:24 AMYes....it's glued over the top "shelf" and wrapped around a bit so when the seat is in place nothing is open. :alan2cents:

Do you just use 3M spray adhesive for the glue?
Title: Re: Convertible well liner
Post by: Nel on June 16, 2024, 05:37:00 AM
3M spray adhesive that's exactly what I have use ans still hold afther 12 years.
Text only | Text with Images