Convertible well liner

Rich G. · June 10, 2018, 05:56:11 AM

Never had a convertible so I don't know how certain things work. ( 70 Challenger ) On the well liner I see it snaps around the back but what do you do with the front part? I happen to look through the back window and saw the motor when the top was up. Didn't seam right. Do you glue it somehow to the car somewhere?

71vert340 · June 10, 2018, 06:02:22 AM

In my 71, the front slides into a grooved track on the top rear of the rear seat back if I remember correctly.
Terry

71vert340 · June 10, 2018, 06:16:06 AM

My Bad. I was thinking of the top boot cover. I'll go out and take a look.
Terry

71vert340 · June 10, 2018, 06:21:34 AM

I went out and took a look. It looks like it is glued to the shelf or brace behind the back of the seat. I can't tell how much glue without taking the seat back out as the material edge is hidden by the seat back. The top hold down clips sit on top of the well liner and are bolted through. Mine is original and never been replaced so I can't help you beyond what I can see now.
Terry

anlauto · June 10, 2018, 06:50:24 AM

Yes....it's glued over the top "shelf" and wrapped around a bit so when the seat is in place nothing is open.

Rich G. · June 10, 2018, 07:00:47 AM

That makes sense. Thanks for the info.

superdave · June 10, 2018, 07:05:53 AM

Quote from: 71vert340 on June 10, 2018, 06:21:34 AM
I went out and took a look. It looks like it is glued to the shelf or brace behind the back of the seat. I can't tell how much glue without taking the seat back out as the material edge is hidden by the seat back. The top hold down clips sit on top of the well liner and are bolted through. Mine is original and never been replaced so I can't help you beyond what I can see now.
Terry

"origional and never been replaced"

You lucky dog, that must be one sweet car!!

1ownr · June 10, 2018, 08:14:00 AM

Quote from: anlauto on June 10, 2018, 06:50:24 AM
Yes....it's glued over the top "shelf" and wrapped around a bit so when the seat is in place nothing is open.

here it is on a cuda

judy

BIGSHCLUNK · June 10, 2018, 09:00:55 AM

NIKKI looks about the same.... (70 Chally)

Rich G. · June 10, 2018, 04:54:09 PM

Good pic. Time to take the seat out! Thanks for the info

Cuda_mark · June 15, 2024, 05:15:14 PM

Quote from: anlauto on June 10, 2018, 06:50:24 AMYes....it's glued over the top "shelf" and wrapped around a bit so when the seat is in place nothing is open.

Do you just use 3M spray adhesive for the glue?

Nel · June 16, 2024, 05:37:00 AM

3M spray adhesive that's exactly what I have use ans still hold afther 12 years.

Glove box liner install Started by Finoke on Interior	6 Replies 1660 Views	Last post: February 08, 2021, 06:27:13 AM by JunkYardFind
Glove box Liner install! Started by Wayne on Interior	3 Replies 771 Views	Last post: February 13, 2022, 05:00:19 PM by Katfish
head liner in 72 challenger Started by roguedc72 on Interior	3 Replies 577 Views	Last post: September 27, 2020, 09:09:24 AM by Dynamo
Press board head liner Started by Iowa Six Barrel on Interior	6 Replies 1134 Views	Last post: November 10, 2017, 07:46:23 AM by shawge
73 Cuda Glove box liner install video Started by JunkYardFind on Interior	1 Replies 595 Views	Last post: February 12, 2021, 10:15:12 PM by headejm