Print Page - 1970 Big Block A/C parts NEEDED....

Title: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on February 25, 2017, 07:22:12 AM

I'm looking for all four of the underhood A/C lines for a 1970 E Body with a 440 4bbl.
383 should be the same, and the two smaller hoses the connect to the dryer should be the same on a 1970 318/340 as well.
Part numbers are:
3441 085
3441 524
3441 091

PM me here or email anlauto@hotmail.com :wave:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Cuda Cody on February 25, 2017, 07:27:41 AM

I'll ask around and see if anyone I know might have those. :fingerscrossed:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Cuda Cody on February 25, 2017, 10:45:38 AM

Called a friend that I thought had some AC parts. He said I bought them years ago in a package deal and that they should be in my stash of parts. Well he was right. :Thud: I found some AC parts. Don't know if they are what you are looking for, but here's some photos. Any of this stuff what you are looking for @anlauto (https://forum.e-bodies.org/mlist/anlauto_19) ?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: HP_Cuda on February 25, 2017, 10:48:46 AM

I think Alan just fainted....

:grouphug:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on February 25, 2017, 10:50:09 AM

Quote from: HP_Cuda on February 25, 2017, 10:48:46 AM

I think Alan just fainted....

:grouphug:

Pretty much....PM sent

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: 70chall440 on February 25, 2017, 10:54:57 AM

is this stuff specific to Ebodies? I have a fair amount of AC stuff (lines and such) but am not sure if they are off an ebody.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: 71GranCoupe on February 25, 2017, 12:32:15 PM

Sure hope Cody can help you out Alan. The last time you were looking for AC parts, it took like a bazillion posts before you hit pay dirt. :rofl: :haha: :rofl:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on February 25, 2017, 12:36:48 PM

I ran into so many guys that had the lines, either posted pictures or even emailed me pictures only to tell me they weren't for sale :looney: :haha:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: turbostang7 on February 25, 2017, 12:57:55 PM

Saying this the whole time too!

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Cuda Cody on February 26, 2017, 04:01:04 PM

@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) tell me what numbers you want me to send you? #7 is one long piece that is all bolted together (that's why it's green outline).

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on February 26, 2017, 04:37:49 PM

I would be interested in the brackets and the tube off of the back of #3 The compressor is too heavy to ship, and I can get a rebuilt one no problem.
I would be interested in #6

And I would be interested in the big part of #7 You can take it apart really easy to package it up easier.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Cuda Cody on February 26, 2017, 05:06:32 PM

Sounds good. I'll try to get it all boxed up and out later this week. Same address as the stickers? Shipping with the United States Post Office okay?

Quote from: anlauto on February 26, 2017, 04:37:49 PM
I would be interested in the brackets and the tube off of the back of #3 The compressor is too heavy to ship, and I can get a rebuilt one no problem.
I would be interested in #6

And I would be interested in the big part of #7 You can take it apart really easy to package it up easier.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on February 26, 2017, 05:23:03 PM

Yea That's fine....You just tell me the total.....

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Shoooter on February 28, 2017, 05:41:58 PM

That heater core in the top right is a AC one for 70-74 ebody FYI. Not sure about the other ones. They look like non ac ones

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on February 28, 2017, 09:46:06 PM

@Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) I'm looking at #3, the a/c compressor that Alan passed on, I'd be interested in the complete clutch/coil assembly. Can you get a better picture of the front face to see if it's the right one I'm looking for.

Vic

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Cuda Cody on February 28, 2017, 09:58:57 PM

@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) Let me know if this is what you are looking for?

Quote from: jetmech on February 28, 2017, 09:46:06 PM
@Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) I'm looking at #3, the a/c compressor that Alan passed on, I'd be interested in the complete clutch/coil assembly. Can you get a better picture of the front face to see if it's the right one I'm looking for.

Vic

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Cuda Cody on February 28, 2017, 10:00:47 PM

I think it's off a big block, but not 100% sure.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 01, 2017, 04:04:55 AM

@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) you're welcome to the clutch/coil assembly, but consider pressing a new bearing into it :alan2cents: before you use it.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 01, 2017, 01:04:26 PM

thanks @Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) for getting the pictures. That one I believe is a '72 style clutch, with the four ribs at 12/3/6/9 o'clock positions. I'm looking for a '69-71 style which has a smooth front. I have that '72 style right now and want to change it out to be more correct before I put everything back together. Thanks for the help :worship:

@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) good tip on replacing the bearing. I plan to have some of my parts restored so that should be taken care of, when I find the '70 style clutch. Luckily I was able to get a complete small block set-up with the two impossible to find compressor suction and discharge lines for my 340. I'll have those restored and the rest of the components will be new. :ohyeah:

Vic

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Roadman on March 01, 2017, 01:25:03 PM

Quote from: jetmech on March 01, 2017, 01:04:26 PM
thanks @Cuda Cody (https://forum.e-bodies.org/mlist/cuda-cody_1) for getting the pictures. That one I believe is a '72 style clutch, with the four ribs at 12/3/6/9 o'clock positions. I'm looking for a '69-71 style which has a smooth front. I have that '72 style right now and want to change it out to be more correct before I put everything back together. Thanks for the help :worship:

@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) good tip on replacing the bearing. I plan to have some of my parts restored so that should be taken care of, when I find the '70 style clutch. Luckily I was able to get a complete small block set-up with the two impossible to find compressor suction and discharge lines for my 340. I'll have those restored and the rest of the components will be new. :ohyeah:

I think I have the clutch you need, will look tomorrow and advise. :drinkingbud:

Vic

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 02, 2017, 11:42:43 AM

@Roadman (https://forum.e-bodies.org/mlist/roadman_17) Thanks, I appreciate you taking a look for the clutch for me.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Roadman on March 02, 2017, 01:01:41 PM

Quote from: jetmech on March 02, 2017, 11:42:43 AM
@Roadman (https://forum.e-bodies.org/mlist/roadman_17) Thanks, I appreciate you taking a look for the clutch for me.

No prob, won't be able to check till Sat. Will let you know. :slapme5:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 02, 2017, 02:02:25 PM

@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) Where abouts in Ontario are you ? I might have one too...

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 02, 2017, 04:07:42 PM

@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) Mississauga

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: blown motor on March 02, 2017, 04:12:41 PM

He's your neighbour Alan!

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 02, 2017, 04:24:15 PM

I've actually been to his place once before to buy something awhile back

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 02, 2017, 04:38:07 PM

Cool.....I know I have a couple of them, I'll have to see what the front looks like, next time I'm out at my storage area.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 05, 2017, 09:06:03 AM

@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) Sorry, but this is what I have. Came off of a 70 Challenger, but that doesn't mean it was original....

Thought I had two, but could only find one this morning.

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Roadman on March 05, 2017, 12:56:15 PM

Mine looks aftermarket, no dice. Sorry @jetmech (https://forum.e-bodies.org/mlist/jetmech_54)

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 06, 2017, 01:21:03 PM

Thanks guys for looking, Alan that one you have there is the same I currently have. Either I'll keep looking or use mine. Thanks again guys

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 06, 2017, 01:21:55 PM

Do you have a picture of the one you want ?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 06, 2017, 01:36:29 PM

Here's the early version I believe

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 06, 2017, 02:03:49 PM

Okay...I'll keep my eye open :slapme5:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Timbbuc2 on March 07, 2017, 03:42:17 AM

Quote from: Cuda Cody on February 26, 2017, 04:01:04 PM
@anlauto (https://forum.e-bodies.org/mlist/anlauto_19) tell me what numbers you want me to send you? #7 is one long piece that is all bolted together (that's why it's green outline).

Does anyone have #6 like what Alan got for Cody?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: blown motor on March 07, 2017, 06:28:21 AM

@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) Found this on ebay. I just bought some stuff off from this guy. He's good to deal with. Tell Murray sent you.

http://www.ebay.ca/itm/Mopar-RV2-AC-Compressor-Clutch-Pulley-Hub-Cuda-Challenger-Charger-GTX-Chrysler-/381993645621?hash=item58f0987635:g:5S4AAOSwjDZYboqf&vxp=mtr

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: fc7cuda on March 08, 2017, 05:32:46 AM

Do you know the years for this one?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: fc7cuda on March 08, 2017, 05:33:43 AM

Or this one?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: fc7cuda on March 08, 2017, 05:34:45 AM

Anything in here you need?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on March 08, 2017, 12:08:27 PM

maybe there is the suction line @Timbbuc2 (https://forum.e-bodies.org/mlist/timbbuc2_22) is looking for buried in the bottom of that box, hard to tell if its the right one. I'll send you a PM, fc7cuda about the clutch

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: headejm on March 08, 2017, 12:20:43 PM

Quote from: jetmech on March 06, 2017, 01:36:29 PM
Here's the early version I believe

:iagree: My 1970 looks just like that one!

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: blown motor on March 08, 2017, 01:13:58 PM

Quote from: headejm on March 08, 2017, 12:20:43 PM
Quote from: jetmech on March 06, 2017, 01:36:29 PM
Here's the early version I believe

:iagree: My 1970 looks just like that one!

Just to confuse matters my 74 looks like that also. However I'm the 4th owner and can't say for certain that it's original. The serial # on the compressor is 690919 and the part # is 3512708. Can anybody put a year to it?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: Timbbuc2 on March 08, 2017, 04:37:30 PM

Quote from: fc7cuda on March 08, 2017, 05:34:45 AM
Anything in here you need?

What year model is this box of goodies for?

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on March 19, 2017, 02:48:55 PM

@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) FOUND IT ! I knew I had one....this one is even dated the 36 week of 1969....

Yours for $40.00 if you want to drive to Georgetown...

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: anlauto on November 30, 2017, 07:21:32 AM

Quote from: anlauto on March 19, 2017, 02:48:55 PM
@jetmech (https://forum.e-bodies.org/mlist/jetmech_54) FOUND IT ! I knew I had one....this one is even dated the 36 week of 1969....

Yours for $40.00 if you want to drive to Georgetown...

Met Vic today, he came to pick up this AC clutch, great guy, sounds like he's putting together an awesome B5/B5 340 auto/AC Cuda....Can't wait to see it finished ! :drooling:

Title: Re: 1970 Big Block A/C parts NEEDED....
Post by: jetmech on November 30, 2017, 01:11:53 PM

Thanks again Alan, I hope to get the car finished also and thanks for being a great source of e-body info in person and on this site.

E-Bodies.org Cuda Challenger Forum

Classifieds => Parts Wanted => Topic started by: anlauto on February 25, 2017, 07:22:12 AM