1970 Big Block A/C parts NEEDED....

[anlauto]

I'm looking for all four of the underhood A/C lines for a 1970 E Body with a 440 4bbl.
383 should be the same, and the two smaller hoses the connect to the dryer should be the same on a 1970 318/340 as well.
Part numbers are:
3441 085
3441 524
3441 091

PM me here or email anlauto@hotmail.com 

[Cuda Cody]

I'll ask around and see if anyone I know might have those.   

[Cuda Cody]

Called a friend that I thought had some AC parts.  He said I bought them years ago in a package deal and that they should be in my stash of parts.  Well he was right.     I found some AC parts.  Don't know if they are what you are looking for, but here's some photos.  Any of this stuff what you are looking for @anlauto  ?

[HP_Cuda]

I think Alan just fainted....

[anlauto]

I think Alan just fainted....

Pretty much....PM sent

[70chall440]

is this stuff specific to Ebodies? I have a fair amount of AC stuff (lines and such) but am not sure if they are off an ebody.

[71GranCoupe]

Sure hope Cody can help you out Alan. The last time you were looking for AC parts, it took like a bazillion posts before you hit pay dirt.     

[anlauto]

I ran into so many guys that had the lines, either posted pictures or even emailed me pictures only to tell me they weren't for sale

[turbostang7]

Saying this the whole time too!

[Cuda Cody]

@anlauto  tell me what numbers you want me to send you?  #7 is one long piece that is all bolted together (that's why it's green outline).

[anlauto]

I would be interested in the brackets and the tube off of the back of #3 The compressor is too heavy to ship, and I can get a rebuilt one no problem.
I would be interested in #6

And I would be interested in the big part of #7 You can take it apart really easy to package it up easier.

[Cuda Cody]

Sounds good.  I'll try to get it all boxed up and out later this week.  Same address as the stickers?  Shipping with the United States Post Office okay?

I would be interested in the brackets and the tube off of the back of #3 The compressor is too heavy to ship, and I can get a rebuilt one no problem.
I would be interested in #6

And I would be interested in the big part of #7 You can take it apart really easy to package it up easier.

[anlauto]

Yea That's fine....You just tell me the total.....

[Shoooter]

That heater core in the top right is a AC one for 70-74 ebody FYI. Not sure about the other ones. They look like non ac ones

[jetmech]

@Cuda Cody  I'm looking at #3, the a/c compressor that Alan passed on, I'd be interested in the complete clutch/coil assembly. Can you get a better picture of the front face to see if it's the right one I'm looking for.

Vic