A833 and Gear Vendor

[gilbiy1977]

I have spent a lot of time searching this forum about the Gear Vendor setup and found a lot of great information and success stories when installing on a 727 but almost nothing on the A833.  Would like to hear how you fellow 3 peddlers like your Gear Vendor and if you have any regrets or recommendations.
My setup is a 1970 Cuda 4 speed with a 383 stroked to 496 running a sure grip with 3.55 gear.  When its not breaking traction it tachs 2,900 at 60mph. I'm hoping the Gear Vendor will let me run 75 at that rpm.

https://www.gearvendors.com/buy-now.html?MANUFACTURER=DODGE&VEHICLE_TYPE=CAR&MODEL=BARRACUDA&YEAR=70-74&TYPE=PERFORMANCE+STREET&FUEL_TYPE=GAS&WHEEL_DRIVE=REAR+WHEEL+DRIVE&TRANSMISSION_TYPE=MANUAL&remove=true&TRANSMISSION_MODEL=4-SPEED+A833+16.5+TAILHOUSING+30+SPLINE+OUTPUT+SHAFT&submit.x=23&submit.y=11

[gilbiy1977]

WOW, None of you guys have a Gear Vendor in your 4 speed car? Should I be worried why or be the Guinea Pig. 

[RUNCHARGER]

GV is s great, tough addition. I would have no problems adding one for sure. The RPM drop is pretty much right for most applications too.

[anlauto]

WOW, None of you guys have a Gear Vendor in your 4 speed car? Should I be worried why or be the Guinea Pig. 

Likely easier to put a Tremec TKX 5 speed in