Trunk Lid paint on a TA Challenger

[anlauto]

Is this a factory "black-out" treatment on the trunk lid of a T/A ?

[Shane Kelley]

  It sure looks that way. I have never seen that before and I'm guessing you haven't either. Be curious to see if anybody knows for sure.

[anlauto]

I've only restored one original TA and it didn't come to me before paint, so I don't know how it looked originally, but I was just going through old photos....I have one with the spoiler in place and no black-out.....then another with black-out.....So I must have figured it out at one point....but I have never seen an original lid without the spoiler in place.....Interesting photo...

[Cuda Cody]

Yes, the black out rear treatment carries up to the deck lid and then there are vinyl decals that go on top of the rear quarters that align with the spoiler.

[Cuda Cody]

 

https://www.e-bodies.org/resources/cuda_challenger_tsb_specifications_engineering_illustrations_drawings/

https://www.e-bodies.org/Resources/Engineering_Illustrations/Stripe_Tape_TA_Challenger_Tail.pdf

Here's the best page...

https://www.e-bodies.org/Resources/Engineering_Illustrations/Stripe_Tape_TA_Challenger.pdf

[anlauto]

Yea...I've seen the TSB's before, never an actual lid...

[Shane Kelley]

Would the be flat black or organisol?  Learned something new today!

[Cuda Cody]

The sheet shows it as organasol, but what they used on the factory line could have been different.   

[Headjam]

Looks like that car might of had a bumblebee stripe at one time. 

[Cuda Cody]

Not my photos, but they are of an original TA 

[RUNCHARGER]

That must have been about the way they shot it too I bet.

[Floyd]

I've seen multiple original paint T/As with blackout like that on Troy's bronze T/A. I have pics somewhere of an original paint green go T/A with black paint all the way under the spoiler, like in the engineering drawings.  I'll dig it up and post it.