Heater Box NON-A/C Restored

[cudaize]

Restored E-body Non-A/C heater box. 

One of the key items here is that it retains all the original material on the lip of the vent by the passenger foot area.  There was a crack that I scratched out and strengthened with clear resin.  I did not want to do too much work here as I wanted to retain the original look of the fiberglass.  The crack is slightly noticeable on the top and bottom.

I did not restamp any of the parts as the original stampings were all bleached out from sun before I received the box.

Originally from a 70 challenger.

Original heater motor restored with housings zinc plated
Original heater core rebuilt by Glen-Ray Radiators
Brackets and doors are bare steel protected with RPM
Screws zinc plated
Clips parkerized for phosphate finish
Used DMT gasket kit
Back plate is black enamel, I believe this was 1970 only with later ones bare metal.

$1,500.00 plus shipping

Can bring to Carlisle

[Cuda_mark]

So that's what they are supposed to look like without a busted up lip!! I don't think I've ever seen one.

Looks good!