Main Menu

70 8 track radio mount bracket

Started by Aar1064, June 28, 2017, 03:52:51 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

Aar1064

Is the arm bracket the only thing that holds radio in place? When testing radio while dash was out of my car the radio would move while inserting a tape and I was thinking that radio should be mounted at some other point as well.

8 track is being repaired by Barry's and I'd like to be ready to install once it arrives.

Thanks

Jay Bee

There should be 2 underside bolts that go through the dash frame and into the radio. I believe they're a 10-24NC thread.

ec_co

Growing older is mandatory...growing up is optional.

Be who you are and say what you feel, because those who mind don't matter and those who matter don't mind.

'70 Barracuda B5/B5 225 /6 3spd ... about as bare bones as they came


Cuda Cody

Yes, that's the bracket that holds the rear of the radio.  There's also the 2 bolts (mentioned above) that attach the  radio to the dash frame from the bottom of the radio.

1 Wild R/T

See the two notches on the bottom edge.... bolts go there...

Aar1064

 :banana: :banana: Gosh never saw these mount holes when I had it here. So much stuff to do it's really great when something simple comes along.

Thanks for the help as always. ebodies.org rocks!