Main Menu

70 challenger dash frame vent position

Started by 70rtse, April 26, 2019, 06:34:25 AM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

70rtse

Hi guys can any one tell me what holes i need to fill on bottom of my dash frame before i paint frame.The vent  control broke are these  2 controllers factory.
70 challenger non A/C

anlauto

ALL the holes in that picture are factory holes, so no worries there.
The one vent cable mounted with some sort of make shift metal bracket is not original.
The square "vent" cable is correct for 1970. Round one is not
New "vent'' cables are available in reproduction. Contact David at Roseville. :twothumbsup:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

70rtse

Thanks so is there meant to be 2 vents and how about the holes with all the tech screws


anlauto

TWO cables , FOUR  screws. The rest of the holes are not used unless you have a map light  :alan2cents:
I've taught you everything you know....but I haven't taught you everything I know....
Check out my web site ....  Alan Gallant Automotive Restoration

Cuda Cody

Here's some photos of dash hole locations.

Cuda Cody


70rtse