Auto Meter Sport Comp gauges in a standard dash

[Plum70Dodge]

This may have been more work than I expected but I like the results.

[Dakota]

  Nice job!

[anlauto]

Very cool....what about a speedo ?

[Plum70Dodge]

I kept the original speedo. Cut the clear lens in half on a scroll saw and kept that part just over the speedo.
The scroll saw moves a bit too fast and the plastic would weld itself back together immediately after a pass.
Everything here was a challenge.

[anlauto]

Does Auto Meter make a speedo that large...that would be cool

[jimynick]

Nice job of integrating those gauges, that looks good! 
PS- buy a variable speed saw and that re-welding issue goes away. 

[mopar1]

Old thread but I'm interested in doing this for my Cuda.  Are you using 2 1/16" or 2 5/8" gauges? @Plum70Dodge

[Brads70]

Here is another option?
https://forum.e-bodies.org/interior/6/custom-speedhut-gauges-standard-dash-cluster/298/msg2804#msg2804

[6PKRTSE]

Nice job. Looks good. I almost went that route with mine also. Decided to go with the Racepak dash. If gives me 24 gauges total. 6 per screen on 4 different screens. That way I can run a street gauge display and change it for out at the track for a race display. I made a dash block off panel.

[TheAutoArchaeologist]

Here's what I did.

[Brads70]

Is see dash panels are available for standard gauges FYI...

https://mcbparts.com/gauges?pagenumber=8

[Plum70Dodge]

Sorry such a delay here.
Yes 2 1/16 guages.
I found the polycarbonate clear tube on ebay and used a wheel hub centering ring for a spacer.
I have a lot more pictures of this.

[mopar1]

Sorry such a delay here.
Yes 2 1/16 guages.
I found the polycarbonate clear tube on ebay and used a wheel hub centering ring for a spacer.
I have a lot more pictures of this.

If you would share your photos, it would be much appreciated.  I'm thinking about taking my 3 gauge pod under the dash out and doing this.