Main Menu

emergency brake pedal missing parts

Started by GoMangoBoys, March 11, 2022, 06:32:58 PM

Previous topic Next topic

0 Members and 1 Guest are viewing this topic.

GoMangoBoys

I am trying to put the emergency brake pedal back in the car and am missing 2 parts.  I need the switch that indicates the pedal is pressed and I need the pin that attaches the cable to the pedal.  I bought a new cable. I don't know if it had a pin or not, but I can't find it now.
Thanks.


toadstool

I made the pin, fairly easy. I got a clevis pin that was long, cut in down to size (I.e. 1/8" too long) and took a cut off wheel to the end to grind a grove into it so that it would hold a "C" clip retainer.
70 Cuda Convertible


GoMangoBoys

I searched thru EVERYTHING again and could not find the pin, so I ordered the one from McMaster Carr.  They stock locally by me, so I will have it in a couple of days.

I did find the switch swimming in a sea of bolts on my bench.