emergency brake pedal missing parts

[GoMangoBoys]

I am trying to put the emergency brake pedal back in the car and am missing 2 parts.  I need the switch that indicates the pedal is pressed and I need the pin that attaches the cable to the pedal.  I bought a new cable. I don't know if it had a pin or not, but I can't find it now.
Thanks.

[Dakota]

A previous post that may help on your pin question....

https://forum.e-bodies.org/wheels-tires-brakes-suspension-and-steering/12/source-for-pin-to-connect-parking-brake-cable-to-parking-brake-lever-found-it/18001/msg232399#msg232399

[toadstool]

I made the pin, fairly easy. I got a clevis pin that was long, cut in down to size (I.e. 1/8" too long) and took a cut off wheel to the end to grind a grove into it so that it would hold a "C" clip retainer.

[GoMangoBoys]

I searched thru EVERYTHING again and could not find the pin, so I ordered the one from McMaster Carr.  They stock locally by me, so I will have it in a couple of days.

I did find the switch swimming in a sea of bolts on my bench.